I have been reading up on the documentation for SAN port-security and auto-learn. In the documentation, it seems to be contradictory or I am understanding. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5000/sw/san_switching/b_Cisco_...
Ok, I have read over the documentation multiple times on service insertion and I cant seem to find a good explanation for the internal packet flow with an ACI service insertion with a L2/transparent firewall. So, specifically, Im looking the solution...
I believe I understand the basic differences between using SD-Access transit and using ip transit between different fabric sites. One of the big benefits of SD-Access transit is the preservation of SGT tagging between sites. This is where Im a littl...
In ACI discussions, its always mentioned that BDs are NOT VLANS. The most common argument are that vlans equated to one subnet and thus since you can have multiple subnets in a bridge domain, they are therefore not the same as vlans. However, in t...
Pretty straight forward question....L3 device with equal cost paths to destination. Both next hops are equal distance in terms of AD and metric (think shared segment with 3 devices). Traceroute will show both next hops when in the reply. Now, how ...
Thanks @6askorobogatov . However, that is more high level and more in relation to ACI with the service insertion and traffic redirect. Im looking for more of the specifics after configuring the redirect.. the exact packet flow within ACI and how it...
Thanks everyone for the clarity and the actual details have helped a lot. However, I dont think we are getting to the heart of my question. It seems one of the main goals for the SD-access method was to allow the SGT to be preserved across the tran...
Thanks RedNectar for the reply. See, as far as your bottom line, thats how I have been seeing it as well. However, it seems every document/video/instructor seems to deliberately go out of their way to try to explain it as being far away from being ...
Thanks Rick and Reza....this question didn't arise out of thin air....just looking for some help after failing to find an answer after hours looking at documentation and asking others...
