Hi all,
I have a migrated database from 4.2. I have done some tuning but have noticed under my TACACS Accounting & Authorization I only see one user always.
All my administrators are on the same group as the user I am seeing in the logs.
Under "
Sy...
Hi all,
I am running ISE 2.1 - I have two Guest types1) Guest-5_Day_Guest _Access2) Guest-Mobile_6MonthsNow our Service desk acts as the sponsors, however the default Guest Type on the Sponsor Portal shows Guest-Mobile_6Months.Now it seems that some ...
Hi all, I upgraded to the MD image of 7.4.121.0 about 2 weeks ago... it's cleared up some bugs that I ran in to my environment. A few minutes ago I got my new3702 access points. And luck would have it version 7.4.121.0 does not support the new 3702 ...
Hi all,I am trying to build a Ethernet bridge. The bridge does form ie RAP -> Mesh.If I connect wireless to Mesh I have communications.When I connect the Mesh to a switch (trucked on switch & RAP / Mesh) and connect my Ethernet to the switch I don't...
I have setup and SSID on my WLC. I got the redirecting to my ISE guestportal working.However when I sign in I get a Device regitration Page "This device has not been registered"Unable to obtain the user information needed for network access.The devic...
I am running a distributed setup.This is how it was resolved for anyone else that might have the same issue.1) My log server was the on the primary unit, this was moved to the secondary unit.a. System administrationb. Configurationc. Log ...
I don't believe you can jump directly to prime 3.1 from 2.2You need to upgrade to 3.0 then 3.1I was running prime 3.0 already so only had to use PI-Upgrade-3.0.X_to_3.1.0.0.132.tar.gz file for the upgradeBelow link explains how to upgrade form 2.2 ->...
When you use the prepare command it does copy the bundle to the local disk.
ise/admin# application upgrade prepare ise-upgradebundle-1.3.x-and-1.4.x-to-2.0.0.306.x86_64.tar.gz CiscoISE
Getting bundle to local machine... md5: de9e7c83679897f792ad3e9f...
In the last 2 weeks I have upgraded from ISE 1.2 -> 1.3
then 1.3 -> 2.0. finally 2.0 - 2.1.
I used the same repository where I keep my backups.
So in mycase CiscoISE is my repository
"application upgrade prepare ise-upgradebundle-1.3.x-and-1.4.x-to-...
