Stefan Walter

sorry some missunderstands from myside. we received the update message -> send 200 okay with cs 104 ...

Hi, attached you'll find the logfiles.Seems that the other side send the update and also the bye mes...

Hi Community, need some help regarding an issue related with transfer of sip calls.Normal calls are ...

Hi, can you also explain me, how I bind this on the outgoing dialpeer ?!

Hi Ayodeji, thanks for your reply. This is what I mean, If I register the second trunk to the sip pr...

Hi, but this happen only if I configure the second sip trunk. Thanks,stefan

Hi,now both sip trunks to the sip provider are established and outgoing calls are not possible anymo...

Hi,sorry for delay,dial-peer voice 1000 voip description incoming from Provider translation-profile ...

Hi,thanks for your reply. I far with the preference feature.This is not a solution. Because the seco...

Hi all, have a big problem with the configuration of two sip trunks.If I configure the second sip tr...

Hi all, just configure a cisco cube. Incoming and outgoing calls working fine till now.Just facing a...

Hi,thanks for your reply.Sounds that you running J4W in deskphone mode. In our situation the custome...

Hello community,just facing a strange issue with Jabber for Windows in softphone mode. If the client...

Hi Laurel,is it a unity connection installation ?Are the unity connection configure via SIP or SCCP ...

Hi Asad,it's a 2nd leg of the call ?!? is the call forward number an external device ?!If so, then y...