Hi William,Have you run DBWalker? It should be a good place to start to determine whether you can fi...

Hi Moamen,If you're confident the script is getting invoked properly, then move to the audio file. I...

Moamen, are you wanting to trigger it on inbound and outbound? The inbound voip dial peer won't trig...

Unity 5.0(1) w/failover, Ex2k3, AD2008, CUCM 6.1(3).I have subscribers that don't appear in GSM, but...

Port group needed to be restarted in order to allow the ports to register. The 'Display Name' and 'S...

Is there a way to re-initiate an upgrade (Locale file) that was canceled? I do not want to have to u...

Attachment is the popup from CUCM indicating the naming convention requirement for the VM ports.

Clustered UC 7.0.2.10000-38 with CUCM 6.1.2.1000-13. Voicemail port creation in CUCM REQUIRES the po...

Thank you Roberto.

3560G-24PS: 12.2(40)SEIssuing commands in the interface range command mode, I intermittently get a d...

I solved it by removing the 'caller-id enable' command at the voice-port level. The bug says it's fi...

Thanks for the post Allan.I changed the IP addresses in the config I attached (customer req), so reg...

CCM 4.2(3)sr4, 2 server cluster, VG224 w/ SCCP to Bogen Paging system.I get the FXS to answer, but n...

I encountered the same behavior with the resulting "Error No." popups. I was able to workaround this...