2911 - 15.2(4)M6a - T1 WAN
I'm having difficulty figuring out why I get intermittent ef marked packets in the class-default queue. The matched voice ACL (UDP based port range) counters agree with the realtime counters exactly.
#sh policy-map int g...
Old CER (7.1) & CUCM (6.1.5) cluster. This solution is intended to deliver a recorded message to callers making 911 calls from IP Communicators ('you cannot make a 911 call from this device') - which is controlled by defining the IP Subnet and assoc...
Customer has a virtual CUCM, CUC & CUP environment running on 2 hosts in the same chassis. CUC & CUP are misbehaving due to known CPU utilization bugs and will be upgraded to latest SU. Question is what to upgrade first? CUC is the most unstable,...
Definitely a code problem. Short version: after many weeks of chasing them, Cisco dropped in a test version of IOS code. Problem cleared. Cisco asked to remove test code, problem came back. We are waiting for Cisco to release a mainline version w...
Here is the full class and policy map configs:
class-map match-any realtime match ip dscp efclass-map match-any MarkBusinessData match access-group name BusinessDataACLclass-map match-any Business match ip dscp cs2 af21 af22 af23class-map match-a...
Thank you Rob, I appreciate it.
I was hoping to not affect global settings for this one call flow. I think I'm just going to send the call to ICM for greeting delivery.
Thanks again Rob,
Beau
Thank you both. Mark - it works as expected pulling devices with user & network hold file names.Brian - this too works to pull the pattern's associated MoH file name. I've used them both and verified the syntax.
