About goncalo.girao

goncalo.girao · 05-13-2013

Hello,I am the IT for a company that has several L2 switches with two Private LANs (I have 3 VLANs because we have also public addresses). There are two default gateways for these LAN. So the scenario:1 Default VLAN for main LAN (wich has DHCP)1 Vlan...

goncalo.girao · 05-08-2013

Is it possible to restrain acess from ssh (CLI) without enable GUI acess from wireless lan?Thank you

Load Profile Failed · 05-06-2013

Last week one of our 9 APs (1140) wasnt able to accept connections. I rebooted the AP and again all worked. But on my debug I found this (and again today) (attached image)

goncalo.girao · 04-13-2013

Almost there.Scenario:2504 wlcAps 1140Port 1 lan radius all okPort 2 defined for guest wlan directed attach no isp router dhcp1 utp cable on router acquire ip addressOn guest wlan no ip address is given i think i tried every combinationsAny help?Sent...

goncalo.girao · 04-09-2013

Hi there,I have installed about 2 days ago one Cisco WCS 2504 and 11 APs. Everything is doing well regarding to WEP authentication. But I have a Radius Server that is alson running with some issues on wireless: - Unless I open network settings and cl...

goncalo.girao · 04-10-2014

Hi Scott, we have a /16 as you see by the subnet mask -> 255.255.0.0They are all at the same.

goncalo.girao · 04-08-2014

But is the wireless? Is the Apple TV? Any clues/tips?

goncalo.girao · 04-08-2014

Ok. So I have to forget the config part of the LAP. we have many issues with airplay to apple tv and some forums says that is Bluetooth (mouse) and wireless problems. Any way to round this?

goncalo.girao · 04-08-2014

(Cisco Controller) >show ap config general APBlissMeetRoom Cisco AP Identifier.............................. 3Cisco AP Name.................................... APBlissMeetRoomCountry code..................................... PT - PortugalRegulatory ...

goncalo.girao · 04-07-2014

I'm sorry leo, you are not following me...I need to disable 1 out of 11 APs the 2,4GHz (b/g/n) because when trying to airplay to an apple tv I have many issues with bluetooth mouses (same frequency). So I need only 5GHz at this AP TY

Member Since	‎04-09-2013 02:12 PM
Date Last Visited	‎08-18-2017 04:03 AM
Posts	38

User Statistics

User Activity

Several L2 Switching upgrade to (+) 1 LLayer3 Switch

ssh access (only) from wireless connection

Load Profile Failed

guest wlan

802.1X authentication and roaming issues

Hi Scott, we have a /16 as

But is the wireless? Is the

Ok. So I have to forget the

(Cisco Controller) >show ap

I'm sorry leo, you are not