About Jon Marshall

Jon Marshall · 10-16-2023

I have an ASA (5520) with an outside, DMZ, and inside interface and I want to rate limit the traffic (5Mbps) coming from the outside going to a specific server on the DMZ (192.168.3.3). Never set this up before and it is a live production firewall s...

Jon Marshall · 08-21-2023

Quick question - need to deploy a 3750G stack (two switches) and only have one stack cable at the moment. I know it will work (without redundancy) but when I add the second cable later is there any downtime or does the stack just see the alternate ...

Jon Marshall · 07-10-2023

Quick question as it has been a while so out of practice Can I connect a server with a vPC directly to a pair of Nexus C5548UP switches ie. don't need a FEX or anything in between ? Also any gotchas I need to be aware of ? Many thanks

Jon Marshall · 10-26-2022

This is really more of a pfSense question but there are some very bright people on here so I thought I'd post for a few suggestions. We have a failover pair of Dell 610s, each server has inbuilt 4 x 1Gbps NIC (Broadcom - bce) and we have - bce0 - WA...

Jon Marshall · 09-30-2021

This is following on from - https://community.cisco.com/t5/switching/windows-2016-connectivity-issue/m-p/4477088#M511617 Ran some SPAN tests on the 3750 stack and it looks like it may be an issue with the switches but the behaviour is still no...

Jon Marshall · 10-16-2023

So outbound would be the DMZ interface in my case as I am not trying to limit traffic to the internet (which most of the examples seem to be about) but limit coming from the internet to a server in the DMZ. Jon

Jon Marshall · 10-16-2023

I want to limit traffic going to a server in the DMZ so I assumed it would either be applied inbound on the outside interface or outbound on the DMZ interface but definitely not inbound on the DMZ interface as far as I can tell.

Jon Marshall · 10-16-2023

I did, that was the document I used Wasn't clear to me which interface to apply it to though, I am assuming rate limiting is done outbound by the looks of it.

Jon Marshall · 08-21-2023

Hi Joe As I am not actually breaking the connection, just adding the second cable should be fine as Leo says. Thanks Jon

Jon Marshall · 08-21-2023

Leo Cheers, thought that might be case just wanted to confirm. Jon

Member Since	‎09-22-2003 11:19 PM
Date Last Visited	‎12-30-2023 04:16 AM
Posts	26,581
Total Helpful Votes Received	20533

User Statistics

User Activity

ASA rate limiting

3750 stack cable

vPC connectivity sanity check

PPS and packet loss

3750 stack issues

Re: ASA rate limiting

Re: ASA rate limiting

Re: ASA rate limiting

Re: 3750 stack cable

Re: 3750 stack cable