About alig.norbert

alig.norbert · 06-19-2019

CME ISR4321, ucse subslot does not start automatically after powerON Hi all,Got an ISR4321 with UCS-EN140N-M2 for CUE.Unfortunately the ucse subslot will not boot automatically after reboot or power on.When I execute the CLI "ucse subslot 0/1 server ...

alig.norbert · 06-26-2018

Hi all,I'm looking for some input/ideas about the following design:Core router:- Static default route pointing to the internet firewall (e.g. ip route 0.0.0.0 0.0.0.0 10.1.1.1).- OSPF with several branch routers.- PBR on the interface connected to t...

alig.norbert · 05-20-2018

Hi all, On a CME 12.x, I got a 8841 (dn 297) with SNR to another 8841 (dn 397).The simultanious ringing on dn 297 and 397 is working properly.What I noticed is, that each call that was picked up on the dn 397 will show up as missed call on dn 297. I...

alig.norbert · 03-22-2018

Hi there, We are moving from CME to BE6K/CUCM. On the CME we had a quick&dirty script to change over SSH the CFA number on a specific directory number and send a mail notification. Can this somehow be achieved with the CUCM? Any ideas? Thanks, No...

alig.norbert · 02-14-2018

Hi there, got the same issue with 7821/8861 with the newest firmware on cme12.0. is there any solution?

alig.norbert · 02-20-2023

If‘s no there, it‘s already disabled.

alig.norbert · 09-13-2022

The latest Bangaluru „saved“ our stack..

alig.norbert · 04-06-2022

Hi,I'm facing the same problem with a 3x 9200 Stack (Amsterdam-17.03.04b).Colud you fix your issue?If yes which IOS version are you running? Thanks

alig.norbert · 03-07-2020

What kind of license do you have for the AP?As for the 9800 WLC there is no "add AP license", so the AP needs to have an AIR-DNA license on the smart license portal.

alig.norbert · 01-29-2020

Under User Management / End User / <user> disable "Enable User for CM IM Presence...."With that only this user will not have connectivity to IM&P.

Member Since	‎01-09-2007 11:13 PM
Date Last Visited	‎09-07-2023 08:38 AM
Posts	381
Total Helpful Votes Received	44

User Statistics

User Activity

CME ISR4321, ucse subslot does not start automatically after powerON

Distribute alternative default route, OSPF?

CME; SNR, missed call when answering on the mobile

Set CFALL per script on CUCM 11.5?

CSCsh31569 - Caller ID Update issue with call transfer while using CME-SIP Phone

Re: CME10.5 Caller-ID lost after Call 'Pickup' - service-uri-pickup

Re: C9200 stack reload after saving the configuration.

Re: C9200 stack reload after saving the configuration.

Re: AP2702i AP won't join 9800 vWLC - DLTS handshake error

Re: Can I disable chat on a per user basis in Jabber?