Kevin Dorrell
Level 10
Level 10
Member since ‎06-07-2001
‎11-24-2017

User Statistics

  • 4180 Posts
  • 205 Solutions
  • 903 Helpful votes Given
  • 2422 Helpful votes Received
Recent Badges
50 Accepted Solution
150 Accepted Solution
15 Accepted Solution
1 Accepted Solution
5 Accepted Solution
100 Helpful Vote
 30 Helpful Vote
600 Helpful Vote
300 Helpful Vote
10 Helpful Vote

User Activity

I have a couple of questions concerning ERSPAN on Nexus 5500.   Can I perform ERSPAN from a Nexus 5500 without the L3 module?  I tried using the management VRF as erspan-source, but it would not allow me.  And I am not having much luck setting up a s...
Nexus 7700 version 6.2. Can someone confirm whether this is possible? - I have OTV between two data centres, and I would like to see some statistics concerning which pairs of IP addresses are using the OTV.  The objective is to try and put the pairs ...
I have a situation where I have an OSFP adjacency between two SVIs on different switches, through multiple L2 hops of the VLAN. (Don't ask why!)  If one of those hops goes down, it will take an unacceptably long time (the OSPF dead time) before the S...
I am have some difficulty configuring NTP on Nexus 7700 with VDCs.  I have four Nexus 7700, and each has four VDCs: admin, aggr, otv, and core.  I decided to run the NTP on the core vdc, as that was the one closest to my NTP reference sources.  That ...
I know that if the vPC keepalive link fails, vPC is unaffected as long as the vPC peer-link is still up.  Effectively, the keepalive passes over the peer-link for the duration of the failure. I have a slightly more complicated  requirement: I need to...
Community Statistics
Member Since ‎06-07-2001 07:03 PM
Date Last Visited ‎11-24-2017 08:05 AM
Posts 4,180
Total Helpful Votes Received 2422