About azore2007

azore2007 · 10-08-2015

I've been stuck with Fortigates for awhile and had to help a customer with their ASA setup. They state that Guest interface can reach inside hosts/servers.. And when I check, I see that we have no NAT statement between Guest and Inside networks. ...

azore2007 · 06-15-2015

Hi Question, I got a Cisco 5510 with 3 interfaces InsideDMZ1DMZ2 I have a DHCP server on "Inside" and I want to relay DHCP request from both DMZ to this inside interface...But when I try, I only get to enable relay on 1? What I did:dhcprelay server d...

azore2007 · 09-23-2013

HiIs there a way to get SNMP forwards for AP's going up/down to a NMS station from cisco prime 2.0?We are using OP5 as NMS and it would be very sweet if we could get dynamic AP events to OP5 from Cisco Prime.Or, should we just let controllers snmp tr...

azore2007 · 07-10-2013

Hello all.My company is looking to invest into a supplier of wifi survey tools.I have used airmagnet survey pro and I like it.. But it is rather expensive.My collegue then found netspot, it's for Mac OS only, I did a fast trial of it of it and perfor...

azore2007 · 02-25-2013

Hello everyoneRunning vwlc 7.3.101 and encountered a smaller issue.When you enable / disable a SSID, all AP's reset their radio interfaces... causing everyone to drop their connection.Is this intentional?Thanks

azore2007 · 10-08-2015

Thanks all for the fast answers. Now I got so much NAT cleaning to do on other firewalls..ugh

azore2007 · 10-08-2015

Fast answer! Appreciated! Follow up question/clarification I do not have to think about different security levels then? I only need NAT when I want do to do PAT/change IP addresses instead of the original IP's? Thanks

azore2007 · 06-16-2015

Alright.. think I solved it. I created another interface.. which was able to use dhcp relay.. So I deletede dmz2, wrote config and re-created it.. now it works suddenly will test with users and see if it actually works or not

azore2007 · 06-16-2015

I have removed the configuration, wrote the config and tried again.. doesnt work Tried in ASDM [OK] dhcprelay enable dmz1[OK] dhcprelay setroute dmz1[ERROR] dhcprelay enable dmz2Command failed[OK] dhcprelay setroute dmz2[OK] dhcprelay server dhcpserv...

azore2007 · 06-15-2015

hi Akshay, I never tested to try and save config..In CLi it takes the command and just removed the old one and uses the new cli command. If I try this in ASDM i actually get an error (when checking both interfaces for an relay) that one of the inter...

Member Since	‎06-11-2007 10:57 PM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	106
Total Helpful Votes Received	5

User Statistics

User Activity

9.1 ASA NAT question (why it works)

Cisco ASA multiple DHCP relay interfaces

Cisco prime 2.0 -> Op5 NMS

netspot as professional site survey program?

Radio resets when enabling new SSID

Thanks all for the fast

Fast answer! Appreciated!

Alright.. think I solved it.

I have removed the

hi Akshay, I never tested to