As per: http://www.cisco.com/c/en/us/support/docs/security/pix-500-series-security-appliances/97853-Transparent-firewall.html#backinfo Only two interface can be used for data, and a 3rd one for failover. Regards, Felipe.  Remember to rate useful post...

Hello, Maybe the reply is kind of late, but I dont see why it wouldn't work. Regards, Felipe.  Remember to rate useful posts.

Hello, The problem doesn't seem to be related with DRAM but with flash memory.Can you run a 'show flash' and try 'fsck flash' Also I can see you are running 8.2 and 256 MB RAM, be aware of recommended memory: http://www.cisco.com/c/en/us/td/docs/secu...

Hello, Try this: object network obj-103.15.62.X host 103.15.62.xobject network obj-10.0.0.10host 10.0.0.10nat (inside,inside) source dynamic any interface destination static obj-103.15.62.X obj-10.0.0.10 Regards, Felipe.  Remember to rate useful post...

Hello,   What I meant by NAT issue is that it could be hitting the wrong NAT rule or asymmetric NAT. You can confirm the proper NAT and ACL are being used with the packet tracer: packet-tracer input [src_int] protocol src_addr src_port dest_addr  d...