About rhobab

rhobab · 01-21-2019

We currently are validating the computers that access the network by the uid in the cisco-av-pair. For this we have conditions to validate the uid. While this worked fine with a few computers connecting via AnyConnect the amount of machines has incre...

rhobab · 02-02-2017

I need to configure the HDS and AWDB databases from simple to the full recovery model. Is this possible? Is it supported by Cisco? Is there any issue regarding this? I have searched but have not found information regarding this. Thanks in advance Vi...

rhobab · 04-12-2016

I have a C6807-XL with a WS-X6848-SFP-2T line card. We are doing tests with a GLC-LH-SM and the transceiver does not work when inserted in the WS-X6848-SFP-2T. If I insert this transceiver in another switch for instance a WS-C2960X-48LPD-L it works ...

rhobab · 09-04-2014

Hello Does any one know if it is possible to have a Generic PG with pims for CUCM, IP IVR and CVP? Thanks in advanceVictor

rhobab · 10-23-2013

HelloI have a CME configured to add a prefix on the outgoing pots dial-peer. Connection to the PSTN is done via a E1. When we dial a number and the connection is made the ip phone displays the prefix followed by number we dialed. For example we dial ...

rhobab · 06-22-2020

HelloWere not able to do this.

rhobab · 01-28-2019

It is being validated against a condition in an authorization rule. Any machine with AntConnect has a UID which is randomly generated. In my opinion it is reliable.

rhobab · 01-24-2019

As far as I know the uid is automatically generated when you install AnyConnect on the computer. It appears in the ISE logs as mdm-tlv-device-uid.[cid:image002.png@01D4B3DD.ED261FB0]

rhobab · 01-22-2019

Remote access.

rhobab · 01-21-2019

Hello, Anyway of doing this but doing a database dip? Our scenario is also using the uid in the Cisco-av-pair but the number of endpoints is enormous making the conditions hard to handle. We would like to insert the uids into a database and query the...

Member Since	‎07-31-2003 08:39 AM
Date Last Visited	‎03-27-2024 12:16 AM
Posts	158
Total Helpful Votes Received	29

User Statistics

User Activity

Use cisco-av-pair with database query.

UCCE 10.5 database from simple to full recovery model

WS-X6848-SFP-2T on a C6807-XL will not activate transceivers.

Generic PG with CUCM, IP IVR and CVP

Remove prefix form IP phone display CME

Re: Using an AVpair value in an authorization rule

Re: Use cisco-av-pair with database query.

Re: Use cisco-av-pair with database query.

Re: Use cisco-av-pair with database query.

Re: Using an AVpair value in an authorization rule