Alok Jaiswal

Alok Jaiswal · 01-29-2014

Hi Swinster,x8.1 has incorporated many changes some of them are like delegate control functionality,...

Alok Jaiswal · 01-29-2014

i forgot to mention that this setting only works for SIP calls and for H.323 calls its not applicabl...

Alok Jaiswal · 01-29-2014

Joshua,setting call routed mode to "always" doesn't mean that any calls through that zone will have ...

Alok Jaiswal · 01-28-2014

Patrick,when you set the zone or subzone to "treat as authenticated" that means any request through ...

Alok Jaiswal · 01-27-2014

Patrick,As you must be already aware Jabber registration involves two phase i.e. subscribe & registr...

Alok Jaiswal · 01-27-2014

Douglas,i tested in lab and it doesn't import user from AD, it gives error.Since i already had user ...

Alok Jaiswal · 01-27-2014

Gear,can you give us more details about your setup. like software versions, is your conductor in B2B...

Alok Jaiswal · 01-27-2014

Richard,if the request are coming from a particular IP or bunch of ip's you can try to put the firew...

Alok Jaiswal · 01-27-2014

Hi Douglas,You can't import the AD users with same name if its already exists in the local database ...

Alok Jaiswal · 01-26-2014

Sebastian,so you mean to say you forcefully remove the cable from first VCS-E and then go to endpoin...

Alok Jaiswal · 01-26-2014

Hi Tabish,you can use VCS-starter pack. its designed for small enterprise customers.http://www.cisco...

Alok Jaiswal · 01-26-2014

Hi Patrick,I rebooted my peer VCS and now i can see both the VCS under provisioning extension diagno...

Alok Jaiswal · 01-26-2014

Julien,the B2BUA listen on separate port from lync end. the ports used are 65070 and 65072. you can ...

Alok Jaiswal · 01-26-2014

Hi,since you mentined that your internal endpoints are registered to VCS-C with domain, you need to ...

Alok Jaiswal · 01-26-2014

Svetoslav,the VCS in picture here is VCS control !! are you planning to put this on public ip or pri...

Date Registered	‎01-24-2012 02:52 AM
Date Last Visited	‎08-08-2021 03:27 AM
Total Messages Posted	616
Total Helpful Votes Received	219

Re: VCS ExpressWay and Control on Different Versions