Cisco 3850: IOS-XE/Firmware Upgrade
This procedure is aimed at Cisco 3850 switch ONLY.IOS-XE Bundle Mode is not covered. 9300, 9500 (vanilla & high-performance), ISR 1k, ISR 4k and ASR is not covered. Router(s) & switch(es) r...
NotesA Word from our Sponsors:Introduction:Section 1: General ProcedureSection 2: ROMMON UpgradeSection 3: Cellular Modem Firmware UpgradeSection 4: GOTCHA
This procedure is aimed at Cisco ISR 1k, ISR 4k and ASR 1k router ONLY.IOS-XE Bundle Mo...
This article is to provide better (and understandable) information to non-Cisco readers. For example, Bug ID does not include any useful command(s) to help non-Cisco individuals troubleshoot. Bug ID also states "Catalyst 9K", however, no...
Can someone have a review if this is going to work or not? I want the EEM script to kick in once the router can no longer ping the IP address.
ip sla 11
ip sla schedule 11 life forever start now
ip sla enable reaction...
Switch 1 & 2 are in Install Mode while Switch 3 is in Bundle Mode.
Switch 3 will not be able to join the stack because of this. The firmware for Switch 3 will need to be converted to Install Mode using the following command:
install add file bootfl...