Hi @rookie R ,
> However, R111 itself can not use these routes, such as advertising those to R111's BGP neighbors, right?
This is correct. The route reflector will retain and advertise all of the VPNv4 routes even though it does not have the RT confi...
Hi @Student690 ,
Pinging from R5 to R6 gi0/1 doesn't require any route on R5, as it is directly connected. Pinging for R5 to R6 gi0/0 does require a route though, as it is not directly connected.
Try adding the following default routes.
R5:
ipv6 rout...
Hi @noforshow92 ,
> It seems like only the port that connected to the third router can function as a source and destination
I have not done extended testing, but it looks like it is the case.
> Another thing, why doesn't my CLI recognize the mtu com...
Hi @noforshow92 ,
I made the modification to use the physical interface instead of the loopback interface as recommended previously and it works for me.
Router2:
interface Tunnel0
ip address 100.100.100.10 255.255.255.0
mtu 1476
tunnel source Gigabit...