About Harold Ritter

Harold Ritter · 07-31-2013

Hi everybody,I just received this from a customer, who thinks this might be a record uptime for a Cisco device. Anybody can beat this ;-)Regards

Harold Ritter · 04-18-2024

Hi @Student690 , Pinging from R5 to R6 gi0/1 doesn't require any route on R5, as it is directly connected. Pinging for R5 to R6 gi0/0 does require a route though, as it is not directly connected. Try adding the following default routes. R5: ipv6 rout...

Harold Ritter · 04-18-2024

Hi @noforshow92 , > It seems like only the port that connected to the third router can function as a source and destination I have not done extended testing, but it looks like it is the case. > Another thing, why doesn't my CLI recognize the mtu com...

Harold Ritter · 04-18-2024

Hi @noforshow92 , I made the modification to use the physical interface instead of the loopback interface as recommended previously and it works for me. Router2: interface Tunnel0 ip address 100.100.100.10 255.255.255.0 mtu 1476 tunnel source Gigabit...

Harold Ritter · 04-18-2024

Hi @noforshow92 , I am unable to download the file from this link. Can you please zip the file and upload it here. Regards,

Harold Ritter · 04-17-2024

Hi @noforshow92 , Could you please zip the packet trace file and upload so we can check it. Regards,

Member Since	‎05-07-2003 06:18 PM
Date Last Visited	‎04-18-2024 06:58 AM
Posts	7,760
Total Helpful Votes Received	9682

User Statistics

User Activity

Cisco Equipment Record Uptime

Re: IPv6 ping not working when pinging other LAN

Re: Unable to ping between two tunnel points

Re: Unable to ping between two tunnel points

Re: Unable to ping between two tunnel points

Re: Unable to ping between two tunnel points