About Harold Ritter

Harold Ritter · 07-31-2013

Hi everybody,I just received this from a customer, who thinks this might be a record uptime for a Cisco device. Anybody can beat this ;-)Regards

Harold Ritter · 04-22-2024

Hi @SA2 , Thanks for the additional information. Here's what I can see so far. Scenario 1: (same vlan on both sides) Glad that it worked. I had never tested it and there are probably many limitations (such as explicit-null not working) Scenario 2: (d...

Harold Ritter · 04-21-2024

Hi @pevans1970 , By default, iBGP routes are not redistributed into the IGP. You need to configure the following command for this to happen. router bgp 100 bgp redistribute-internal Regards,

Harold Ritter · 04-19-2024

Hi @rookie R , > However, R111 itself can not use these routes, such as advertising those to R111's BGP neighbors, right? This is correct. The route reflector will retain and advertise all of the VPNv4 routes even though it does not have the RT confi...

Harold Ritter · 04-18-2024

Hi @Student690 , Pinging from R5 to R6 gi0/1 doesn't require any route on R5, as it is directly connected. Pinging from R5 to R6 gi0/0 does require a route though, as it is not directly connected. Try adding the following default routes. R5: ipv6 rou...

Harold Ritter · 04-18-2024

Hi @noforshow92 , > It seems like only the port that connected to the third router can function as a source and destination I have not done extended testing, but it looks like it is the case. > Another thing, why doesn't my CLI recognize the mtu com...

Member Since	‎05-07-2003 06:18 PM
Date Last Visited	‎04-21-2024 05:07 PM
Posts	7,763
Total Helpful Votes Received	9685

User Statistics

User Activity

Cisco Equipment Record Uptime

Re: Pseudowire over XRd not working?

Re: Cannot get BGP to Redistribute into EIGRP

Re: What address-family does PE use to store the routes sent by the CE

Re: IPv6 ping not working when pinging other LAN

Re: Unable to ping between two tunnel points