johnlloyd_13
Level 9
Level 9
Member since ‎12-02-2007
‎03-27-2024
Awards

User Statistics

  • 3707 Posts
  • 267 Solutions
  • 2302 Helpful votes Given
  • 1481 Helpful votes Received

User Activity

hi,i need to migrate G0/0 "outside" and G0/1.xx "inside" sub-interfaces to a new port-channel1 interface.can't seem to pre-configure the same sub-interface VLAN and ip address under the same context.can someone advise what is the best approach and wi...
hi,i have 2 private IP that would need to configure to a NAT pool of /29 public IP.can someone confirm if below config is correct?do i need to add the "flat" keyword to "PAT" using 1024-65535 dynamic ephemeral ports or this is automatic?will both pri...
hi,i need to add an additional VLAN in the FW "inside" interface to a switch. but currently the switch is configured to a single VLAN 30 and will need to configure as trunk.i only have IPsec VPN via internet to this remote site using VLAN 30 on the "...
hi,we have a 4K SIP router and got some issue with outbound calls.saw these logs and PVDM4 stucked in 'booting'the PVDM4 still shows in the 'show inventory'my questions are:1.can this be resolved by a reboot?2.or do i need to reseat the PVDM4 module?...
hi,i need to patch a FW using RJ45 cables to a N5K switch and create a port-channel/etherchannel.i don't want to waste the N5K native ports and buy copper SFP, so i plan use the FEX 2K copper/RJ45 ports instead.my question is, does the N2K-C2248TP-E-...
Community Statistics
Member Since ‎12-02-2007 03:31 AM
Date Last Visited ‎03-27-2024 12:16 AM
Posts 3,707
Total Helpful Votes Received 1481
Helpful Votes From
Awards
Community Spotlight Award
Mobile App Contributor January 2012