About kamrannaseem

kamrannaseem · 09-28-2013

Hi All,Just a quick one, I am little bit confused with the following subnetting question.192.168.8.33/23Need to calculate the following:No of Hosts:No of subnets:Network ID:Subnet mask:Actually they asked me in an interview.Any help will be much appr...

kamrannaseem · 08-30-2013

Hi All,I Just setup a cisco 3750 switch with 12.2(55)SE8 image, whenever I connect my laptop or another switch to it takes 20 minutes for the interface to go from orange to green.any help will be much appriciated.Many thanks.

kamrannaseem · 08-28-2013

Hi All,I just need to check if the following switches support QoS.Catalyst 3750PID VID: WS-C3750G-24TS-E V07SN: CAT1129RGRUCatalyst 2960PID VID: WS-C2960-24TT-L V02SN: FOC1110Z82LAny help will be much appriciatedMany thanks.

kamrannaseem · 08-28-2013

Hi All,I just need to check if my switches are end of sale or life.Catalyst 3750PID VID: WS-C3750G-24TS-E V07SN: CAT1129RGRUCatalyst 2960PID VID: WS-C2960-24TT-L V02SN: FOC1110Z82LAny help will be much appriciatedMany thanks.

kamrannaseem · 08-22-2013

Hi All,I just need to check which port my Wireless Access Point(WAP) is connected to on a switch. When I run the following command I get the port channel no. but i need to know which physical port on a switch this WAP is connected to: sh mac address-...

kamrannaseem · 09-28-2013

Sorry I mean192.168.8.0 and 192.168.9.0Sent from Cisco Technical Support iPhone App

kamrannaseem · 09-28-2013

Hi,Thank you ever so much for the info.How would we know that the two networks would be ?192.168.8.0192.168.8.0Many thanks.Sent from Cisco Technical Support iPhone App

kamrannaseem · 09-28-2013

Hi,I did not get how did u calculate the two subnets.Could you please explain that,Would be much helpful.Many thanks.Sent from Cisco Technical Support iPhone App

kamrannaseem · 09-04-2013

Thanks Joseph,I have got another switch configured with following global commands.spanning-tree mode rapid-pvstspanning-tree portfast defaultspanning-tree portfast bpduguard defaultno spanning-tree optimize bpdu transmissionspanning-tree extend syste...

kamrannaseem · 09-03-2013

Hi Joseph,If I apply the following commands globally:spanning-tree portfast bpduguard defaultspanning-tree portfast default and then on the interfaces where gatway is connected:spanning-tree portfast disablespanning-tree bpduguard disable after app...

Member Since	‎06-28-2013 03:17 AM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	109
Total Helpful Votes Received	5

User Statistics

User Activity

Subnetting

Port Taking long to come up

3750,2960 QoS

3750,2960 End of life

Port no.

Re: Subnetting

Re: Subnetting

Re: Subnetting

Port Taking long to come up

Port Taking long to come up