About Julio Carvajal

Julio Carvajal · 03-24-2015

En esta presentación se hace una introducción a los requerimientos a nivel capa 2 en las redes de información, para evitar diferentes ataques y vulnerabilidades que pueden afectar la producción, además se hablará de las diferentes funcionalidades ...

Julio Carvajal · 02-15-2014

Hello Experts,I have a pair of ASR 1002 running version IOS XE Version: 03.09.01.S 15.3(2)S1 that are showing a completely weird issue.Here is the Scenario: DATA CENTER In San Jose | ...

Julio Carvajal · 02-03-2014

Have you ever worked with a ZBFW deployment where you think the FW is the issue but you are not totally sure so your next troubleshooting step is to disable it to see if you were right???Well.. While I was a Cisco TAC engineer that was one of the ste...

Julio Carvajal · 01-28-2014

Hola a todos,En este vídeo se encuentra la última sesión de nuestro webcast en la cúal mostrare que es necesario para implementar un IOS ZBFW Y como funciona.Saludos a todos desde Costa Rica,Julio Carvajal

Julio Carvajal · 07-19-2013

Hello Everyone,In this post we are going to cover the fundamentals of the port role of multiple authentication and the open authentication variable.I consider that there is no much documentation regarding this features so let's briefly discuss what t...

Julio Carvajal · 11-23-2017

The switch SVI should be in VLAN 10 according to the IP address assignment in your network. So port 9 on the switch connects to the asa trunk interface. Can you share the output of show int trunk on the switch?

Julio Carvajal · 11-23-2017

Hello, Can you share the output of show dhcpd statistics We might need to run debugs and captures later but after checking the config, everything seems good. PD: You did not share the switch config, I hope that one is correct :)

Julio Carvajal · 11-22-2017

Hey Coffee, no, the only way to redirect the traffic is from the ASA itself (on this model).

Julio Carvajal · 11-22-2017

Hello, Are you using the FirePower for HTTP inspection? Do you have any active policies for HTTP? We probably need to check the logs on the Firepower.

Julio Carvajal · 11-22-2017

Hi, I just checked the ACL configuration (very quickly) and I can tell you there is no need to have that ACL. You would have that ACL only if you are troubleshooting the fw (only for a minute or so) and you want to check whether the FW is droppin...

Member Since	‎07-25-2011 05:35 PM
Date Last Visited	‎11-23-2017 06:15 PM
Posts	5,741
Total Helpful Votes Received	3700

User Statistics

User Activity

Introducción a la seguridad a nivel de capa 2 y su implementación. Slides

EIGRP Problem on ASR 1002

How To Enable ZBFW with a Single Command

Zone-Based Firewall: Introducción y análisis a su funcionamiento. Video

What's up with 802.1x port role "multiple authentication" and the open authentication variable

Re: ASA 5505 - DHCP pool per VLAN

Re: ASA 5505 - DHCP pool per VLAN

Re: ASA FirePower Passive Monitor-Only

Re: Single website not showing up as it should Cisco ASA

Re: ASA command