About Carlos Yahir Ramirez Huerta

Carlos Yahir Ramirez Huerta · 01-19-2015

Hi!!I need to propose two ASA (Active-Active) for an edge MPLS Link (100Mbps). Actually, I have 3200 persons in the building.I was thinking in a ASA 5555-X but I am not sure if this device is enough.Do you think is enough or I need a ASA 5585 SSP X?...

Carlos Yahir Ramirez Huerta · 01-07-2014

Hi,I have a Cisco ASA and a L3 switch. My question is, what is the diference between these points? :1. Put an IP Adress directly to the interface switch (giga1/1) where the ASA is connected (Inside) (ASA interface -> 10.0.0.1/30, SwL3 interface 10.0....

Carlos Yahir Ramirez Huerta · 11-28-2013

Hi,is it possible to connect this AP directly to the Switch 2960S? Thanks!!Best Regards!!

Carlos Yahir Ramirez Huerta · 10-22-2013

Hi,I have a switch 4500 as a Core and dhcp server. In this I have a dhcp pool for the vlan 111.I have an other switch, 3560. In this I have one port assigned to the vlan 111. When I connect a computer to this port, the computer get a ip, but I can pi...

Carlos Yahir Ramirez Huerta · 10-07-2013

Hi, I have 2 IronPort Email Security Appliances and I want to know if it is possible to do a high availability with them. I have searched in the Cisco guides and I have not found anything.Does anybody knows if it is possible? Thanks

Carlos Yahir Ramirez Huerta · 01-23-2015

Hi Adawa, I am not considering IPS feature, only AVC. Do you know any rule to sizing NGFW ? Thanks so much!!

Carlos Yahir Ramirez Huerta · 01-08-2014

Thanks!!Sent from Cisco Technical Support iPhone App

Carlos Yahir Ramirez Huerta · 11-28-2013

Thanks!!!Sent from Cisco Technical Support iPhone App

Carlos Yahir Ramirez Huerta · 10-23-2013

Hi,Yes I have a IPICS connected to the 4500.But this mac address is a computer. Is it normal that appears lile this?And why it cant ping to its gateway?Sent from Cisco Technical Support iPhone App

Carlos Yahir Ramirez Huerta · 10-23-2013

Switchport mode accessSwitchport access vlan 111Switchport voice vlan 140Before this conf, I had a portsecurity with max 2 and I realized that the port was in err-disable.But now that the port only has the vlan voice and the vlan access configuration...

Member Since	‎07-31-2013 03:45 PM
Date Last Visited	‎08-18-2017 04:27 AM
Posts	17

User Statistics

User Activity

Sizing ASA

Connecting ASA to a Switch L3

PoE with AIR-CAP1552E-N-k9

DHCP & port connection problem

IronPort Email high availability

Hi Adawa, I am not

Re: Connecting ASA to a Switch L3

Re: PoE with AIR-CAP1552E-N-k9

Re: DHCP & port connection problem

Re: DHCP & port connection problem