About julijime

julijime · 09-27-2023

Hi @johnlloyd_13 , M02@rt37 has already provided an example of the configuration. This is how it would look like in the IOS XR CLI: RP/0/0/CPU0:router(config)# router bgp 1234RP/0/0/CPU0:router(config-bgp)# neighbor-group VPN-RRRP/0/0/CPU0:router(co...

julijime · 09-14-2023

Hi @prohit , This is not an issue with the version 17.9.4 as it was mentioned earlier by @marce1000 this is an issue due to a missing license. If you can see I have a cat8K with the same software version 17.9.4 and with the "network advantage" licens...

julijime · 09-11-2023

Hi @fasteddye , You can use the command "rollback configuration last 1" to undo the committed change, another option is that you can add the configuration manually, for example: RP/0/RSP0/CPU0:ios#sh runThu Apr 10 03:57:30.482 UTCBuilding configurati...

julijime · 09-07-2023

Hi @R Manjunatha , Based on your configuration, the default route being installed in the routing table is the ip route 0.0.0.0 0.0.0.0 59.59.59.1 , if this path does not have reachability to the 10.10.10.10 address the ping is expected to fail. If t...

julijime · 08-14-2023

Hi @Jahidur Rahman, In order to do PAT on your topology and want to reduce time, you can create an ACL that will match your Inside subnets, for example: ip access-list standard 10 10 permit 192.168.0.0 0.0.255.255 Then you need to specify the Outside...

Member Since	‎01-02-2014 10:08 AM
Date Last Visited	‎09-27-2023 12:02 AM
Posts	52
Total Helpful Votes Received	124

User Statistics

User Activity

Re: Cisco NCS 540 IOS-XR MPLS L3VPN Config

Re: cisco IOS-XE17.9.4 is not taking "router lisp" command

Re: ASR9K How to remove preconfigured interface

Re: Two different default routes with different destination are possib

Re: PAT for Many Subinterfaces on the Router