This is getting old.  https://community.cisco.com/t5/switches-small-business/cannot-change-password-on-cbs250-switch/m-p/4664115#M26387 discusses this problem, a NON Cisco person replies says to try a new firmware build it but it does NOT fix it.  An...

For a customer with a SG300-10P, latest firmware, they got a new desktop that has dual NICs.  They already have 2 LAGs going to their NAS drives so I just created a 3rd with the same settings, but no matter what I seem to do one port is active while ...

Having been ratified in 2018, 802.3bt is the IEEE standard for 60w PoE and yet I fear Cisco has little to no plans to fix their proprietary, UPoE, implementation of 60w in their 60w-capable switches.  As we all know, SG350's have been very slow to re...

  Trying to understand why these don't work.  I need to allow ONLY those IPs in rules 1-4 to access the IP inside the LAN; however, I'm able to access those IPs, without issue, from ANY IP outside the firewall.  I have port forwarding enabled on the...

Despite having the console timeout set for 30 minutes, an SG350-28P running firmware 2.3.5.63 is kicking me out after a few seconds to a minute or so.  I've not used a stop watch, but it's definitely not 30 minutes (nor was it 10 which is the default...