Community,
We have an ASR 9910 running 7.9.21 with a A9K-4HG-FLEX-SE card in it. We have tried a few of the different groupings that include 1G ports shown to be available in the "show controllers np valid-port-groups all loca 0/1/CPU0" command. Whil...
We're in the process of replacing a long list of Nexus C3064PQ chassis with C93180YC-FX3s. Many of those 3064s are paired together and have a crosslink configured for IPv4 and IPv6 for iBGP peering. For some reason, we cannot get IPv6 working (not ev...
Hi. I'm trying to do some static NAT on a Nexus 9K and was wondering if there's a way to have it automatically do a one-for-one translation based on subnets instead of host IPs. In other words, I'd like to translate the Outside Global subnet of 192.1...
Given this setup:
R1 and R2 are ASR9Ks running IOS-XR, and R3 is an ASR920 running IOS-XE
We have MPLS with MP-BGP running between R2 and R3 (with OSPF as the underlay in the default VRFs on those routers). Routing between R1 and R2 on the production...
XR fam, We have a few ASR 9006 chassis that are currently running some MOD-80s (Typhoon) for 1- and 10-Gig MPAs plus some 100G line cards (like the A9K-1x100GE-TR). Some of the 100G line cards have 40-kilometer ER4 optics in them (CFP-100G-ER4). We a...
Any chance there's an equivalent of this page for the NCS5500 platform? Would love to see the default marking behavior for all those scenarios for those devices as well.
@anpetit , we are trying to use GLC-TE transceivers in those 1G ports. I see now that they are not listed in the compatibility matrix for the A9K-4HG-FLEX-SE cards.
Harold,
Here's the output you requested. Note that in the "show ipv6 neighbor detail" output there are working IPv6 neighbors (with their IPs obscured) on another port (Po1). Also note that in the output on both routers, our Eth1/1 showed up with the...
