Hi Paucan, Thanks for the reply.I guess there is an issue with th 1310 communicating with the 350. The 350 series bridges run vx works where as 1310 are IOS based devices. so there might be an issue in communication amongst these devices.The same ...

Thanks for the details.I understand that the setup acording to your explanation is as given below:350 root bridge---350 Non-Root Bridge---1310 Non RootWell, this setup doesn't work the way it has been described if this is a Bridge setup.In such a set...

Hey Paucan, You have mentioned that the devices's roles are: non-root bridge from a non-root repeater bridge.This doesn't sound right to me. A on root bridge will connect to a root bridge. Is that what your setup is like ? Repater mode comes u...

Hi Serge, Thanks for the update. I would suggest you, to log a case with Cisco Tac to get this issue resolved.Thanks & Regards,Karthik N

Hi Serge, Thanks for the reply.Your presumption is correct i.e. using an Ethernet (twisted pair) crossover cable.And not a rollover cable i.e. Cisco CONCAB serial to ethernet cable which can be used just to hyperterm or console into the AP and exe...