About User404

User404 · 01-17-2022

Hello,as it says on the following page, the performance of the ASR1002-HX is 44-100 Gbps.https://www.cisco.com/c/en/us/products/routers/asr-1002-hx-router/index.htmlSo what is the standard throughput (unencrypted) and how can it be increased?I can't ...

User404 · 03-23-2020

Hi Guys,we have been considering buying some used Catalyst 9300/9500 for testing purposes, but we are not sure if the license level of the network stack will be maintained. So for example Network Essentials, Advantage or Premier.We have had some outp...

User404 · 12-17-2019

Hello,I have a question about assigning or unassigning a device from a Smart Account.Is it even possible to unassign a device from Smart Account once it has been assigned?The thing is, I bought a used ISR4K and try to activate the security license on...

User404 · 11-11-2019

Hi Folks,I've really read through some datasheets, guides, whitepapers etc now, but I still have some questions.Do I understand correctly that the DNA Center can be used either via the on-prem variant, DNA Hardware Appliance, or via the cloud (i.e. v...

User404 · 08-19-2019

Hello,I have a problem at upgrading the ROMMON of two ESP40.I posted this comment in an existing thread, but without feedback.I have some ASR1006 chassis with 2x RP2, 2x ESP40 and 2x SIP40 (2x SPA-10G cards in the SIPs).During the migration I complet...

User404 · 01-19-2022

I got the following answer from a Cisco System Engineer: ThroughputASR1002-HX with integrated ESP throughput is 100Gbps as standard.ASR1002-HX has 8x 1GE and 8x 10GE integrated ports, but by default only 4x1GE and 4x10GE ports are enabled - this equa...

User404 · 01-19-2022

Well, the answer is unfortunately not very helpful. The licenses listed in the outputs have nothing to do with my questions.Anyway, thank you for your time.

User404 · 01-18-2022

Hi Leo,the only port upgrade licences available for the ASR1002-HX are for the 4x 1G/10G ports that are not enabled out of the box.As far as I know, these have nothing to do with the ports of the EPA cards, as you can only add the corresponding lice...

User404 · 01-18-2022

Hi Leo,this is a hypothetical question, so I have no output.But I don't see how the output should affect the answer.

User404 · 07-30-2021

Hi!I refer to this white paper: https://www.cisco.com/c/en/us/products/collateral/software/smart-accounts/white-paper-c11-741659.htmlEvaluation modes can never allow for the use of Export Controlled functionality due to compliance with U.S. Export la...

Member Since	‎10-12-2017 07:09 AM
Date Last Visited	‎07-08-2022 12:43 AM
Posts	45
Total Helpful Votes Received	26

User Statistics

User Activity

ASR1002-HX Question about Throughput and EPA-10X10GE

Network Stack on used Devices

Unassigning a device from a Smart Account

Basic questions about DNA Access

ROMMON upgrade/migration fails on ESP40 with Config ASR1006, RP2, SIP40 (redundant)

Re: ASR1002-HX Question about Throughput and EPA-10X10GE

Re: ASR1002-HX Question about Throughput and EPA-10X10GE

Re: ASR1002-HX Question about Throughput and EPA-10X10GE

Re: ASR1002-HX Question about Throughput and EPA-10X10GE

Re: Smart License - Out of Compliance