About Mark_Matthias

Mark_Matthias · 01-02-2007

I have two routers connected via ISDN. When I type "show ISDN active", I only see one phone call, no matter what I do to generate tons of traffic.(I can bring up the second link on other pairs of my routers using the extended ping command and bumping...

Mark_Matthias · 03-17-2006

I'm trying to call from Sending_Router# , long distance, to a Receiving_Router" in a town where I am the local telco's only long distance bri customer. I'm using DOV (Data over Voice) because the local phone company has no ISDN CSD(data) capability ...

Mark_Matthias · 03-08-2006

I'm working with a small telco who indicated they have a reduced connection to long distance (MCI). As I understand it maybe the ISDN calls are not handed off digitally. When I hook up my equipment, I can't get a long distance ISDN link to come up fr...

Mark_Matthias · 03-08-2006

I'm working with a small telco who indicated they have a reduced connection to long distance (MCI). As I understand it maybe the ISDN calls are not handed off digitally. Specifically, they are not recognized as digital. When I hook up my equipment, I...

Mark_Matthias · 12-16-2005

I am attempting to back up an ISDN link with a floating static DDR POTS line route. and am using the example in Document ID: 10214 {Configuring ISDN Backup for WAN Links Using Floating Static Routes} as a reference assuming most concepts will be sim...

Mark_Matthias · 01-17-2007

Thanks Rick, Adding ppp authentication chap and making sure usernames and passwords were properly matched seemed to clear this up. It's been working properly for several hours. I appreciate your help.Mark

Mark_Matthias · 01-03-2007

Thanks Rick, The only changes I made to the configuration prior to posting it relate to ip addresses and SPID numbers.I'm hesitating before making a change like adding ppp authentication. I've set up over 50 of these and they all work without it exce...

Mark_Matthias · 03-13-2006

Hi Marcos, I am experiencing eactly the same symptoms. Did you get it figured out? I think my problem is that the long distance carrier does not accept my call as digital. As a result the bearer capability gets changed to voice. http://www.cisco.com...

Mark_Matthias · 03-13-2006

Thanks for your reply. We found this linkhttp://www.cisco.com/warp/public/793/access_dial/8.htmlbut still could not get it to work. We can get connected, but are unable to get LCP to open up. Do you think this is because the telco can not provide DOV...

Mark_Matthias · 03-11-2006

Thanks for the reply. In the example you referenced, the problem was that the "Data Channels were blocked". Is that the same thing as when the small telco is telling me they don't have the hardware to hand off the signal digitaly to the long distance...

Member Since	‎05-06-2004 11:05 AM
Date Last Visited	‎08-18-2017 03:51 AM
Posts	35
Total Helpful Votes Received	4

User Statistics

User Activity

Second ISDN BRI link won't come up on WAN link

The only (long distance) BRI in town

Interesting q931 challenge

Long Distance ISDN

Configuring DDR Pots as a backup to an ISDN connection

Re: Second ISDN BRI link won't come up on WAN link

Re: Second ISDN BRI link won't come up on WAN link

Re: Problems dialing from a external modem to a isdn router

Re: Interesting q931 challenge

Re: Long Distance ISDN