dragos.stroescu

Only the AS should be upgraded.The IOS images can be obtained ONLY from your partner OR directly for...

Hello,You are running a VERY old IOS version!Try a newer image of 12.2 train or even 12.3.You should...

One more,I mean, you should increase that queue:--------------------------------------------Queueing...

Hello there,Try to increase the hold-queue per PVC and serial interface also.The packets are dropped...

And also:-------------------------------------------------1. %NP_EST-6-CTRL_NAK_RSP: [chars]An EST C...

Do you have any other POTS dial-peers into the configuration?If yes pay attention to any "incoming c...

I got the problem.You got a dial-peer matching problem:dial-peer voice 2 potsincoming called-number ...

Not now.We have tried more than one IOS versions on 5400HPX and the behavior it's the same. It looks...

It is not very clear to me what the question is.Just to help you understanding the IOS call processi...

Hello there,Basically just take care at the ISDN compatibility and if from the IVR perspective, the ...

Basically you should try:AS5300(config-if)#isdn network-failure-cause 3on the ISDN serial interface....

Are you using a soft switch behind the AS (e.g. PGW2200) or the AS is standalone?

Basically you should try another IOS.We got implementations using this command and both H323 and RTP...

One more Tamer,All scenarios are OK based on previous explanations just take care to the "PBX Failur...