Hey NetPros, I'm running into an odd problem. I have many remote PIX's set up, all running v6.3(5) and a head office ASA5540 running 7.0(6). All devices are set up with 'service resetinbound' and 'service resetoutside'. If I attempt to connect to one...

Hi NetPro's. I'm looking for a way to add path redundancy to select sites on my existing site to site VPN (all PIX based at the moment).My headend is a PIX 525 (running 7.0.4) and the remote sites are either 501's or 506's (running 6.3.5).I would lik...

Hello, I ran into a problem last night with one of my C2950T-48-SI's. A minute before 11PM, the switch stopped accepting traffic from all ports between 25 and 31, but was still transmitting to them (unidirectional).Clearing out the configuration of t...

Hello, I have a PIX 501 that is configured as a DHCP server for some internal hosts consisting of Thin Clients (Neoware and Wyse) and PC's. For the last few weeks, the DHCP service has been acting up and refusing to assign addresses to the Thin Clien...

Hi, I have two 525's configured in FO. A few months ago I ran into a problem with 6.3.3-133 where both of my PIX's would stop responding on the Inside (embedded) interface and the secondary would flip and take control. After an upgrade to 6.3.4 the p...