About tim_roper

tim_roper · 02-24-2003

Is there a way to mask caller ID from IP phone to IP phone in CallManager 3.1.4b? I heard it was pos...

tim_roper · 02-19-2003

I realize that all lines may use the CCMUser webpage to forward all calls, but is there a way to do ...

tim_roper · 02-19-2003

Scenario: A user has a 7960 phone with 6 different lines.Question: How can you forward all calls (cf...

tim_roper · 02-03-2003

What version of CallManager are you running? What phone load are you using? What kind of headset are...

tim_roper · 01-31-2003

Everything does work like y'all say.One thing that might catch you is the switch on the back of the ...

tim_roper · 01-29-2003

I had the same problem when trying to install headsets. All of the Cisco people I talked to said the...

tim_roper · 12-26-2002

CWUA v20.30 was created for ACUv5.01.001, and I can't seem to change the version of ACU to install. ...

tim_roper · 12-03-2002

Aha! I thought I was using the newest software, but these features are exactly what I am looking for...

tim_roper · 11-21-2002

Which event must I change in order to get the AP350 to report a configuration change to a remote sys...

tim_roper · 10-03-2002

I'm having the same problem with 350 PCMCIA card with the same firmware, drivers and ACU. However, w...

tim_roper · 09-09-2002

On Cisco's download site, there are new MIB's for the AP350; however, I can't find anywhere that exp...

tim_roper · 05-07-2002

Thank you very much...I used the connection PLAR, and it's working like a charm. I'm guessing this i...

tim_roper · 05-03-2002

I am using a 2620 with 2 FXS and 2 FXO ports at a remote site. The 2620 is running 12.2.8T. When the...

tim_roper · 01-22-2002

I have tried 3 different phones. None of the phones have a ringer on/off switch. The phone doesn't r...

tim_roper · 01-19-2002

I have an analog phone connected to an ATA186 running v.2.12.ms. I'm using SCCP to set up the ATA's ...

Masking Internal Caller ID