About Isynth

Isynth · 12-05-2018

Dear Community, I came across a shortage of the RV340 that is rather shocking but I hope the reason is my lack of technical knowledge.I set up two VPN tunnels to one ASA.First connects the local RV340 Network 192.168.1.0/24 to the remote ASA network ...

Isynth · 11-15-2018

Dear cummunity, I'm trying to use a RV 340 Router to establish a Site to Site VPN to two ASAs. I configured the tunnels several times and made 100% sure that the configuration is identical. On both ASAs the PHASE 1 is completed successfully but the...

Isynth · 08-29-2018

Dear Community, once again I am kindly asking for your guidance. I am struggling to get an connection from the AnyConnect clients to the remote Site to Site VPN with an ASA in between. Anyconnect Network 10.10.200.0 ---INTERNET----> ASA with intern...

Isynth · 07-27-2018

Dear Community, I am struggling to get get an connection from the AnyConnect clients to the inernal as well as the Site to Site VPN. Anyconnect Network 10.10.200.0 --> ASA with internal network 10.10.100.0 connected --> remote l2l site 192.168.1.1 ...

Isynth · 07-17-2018

Dear Community, Today I swaped our RV180 Router with a RV340. The RV340 has an public IP address while the ASAs are behind routers. I was sure to copy the config one to one still the Site to Site VPNs are not connected. They are all stuck at: IKEv1...

Isynth · 12-10-2018

as a workaround I have to use hostname and wan IP as idententifier for the tunnels.So what I do DAILY is set the identifier on the ASA to hostname, connect one tunnel manually change back to IP and connect the second tunnel for the second subnet. So...

Isynth · 12-02-2018

Just by asking me for the logs I took another close look at the logs.The identifiers didn't match.Thanks :D

Isynth · 12-02-2018

Looks like there still is no solution fro this which is kind of ridiculous.Why produce a VPN Router if it can not route two subnets on one VPN tunnel?Anyway, as a workaround the following worked for me:I set for one subnet as idintifier FQDN and for ...

Isynth · 12-02-2018

Hallo, I see that the initial post was one year ago.Where you able to solve this issue.I'm stuck in an RV340 in productive. Does that mean I can only use one subnet per l2l tunnel? Thanks for the update.

Isynth · 09-17-2018

Removing this acl entry from the config solved the problem: access-list l2l_list extended permit ip object Net_DC object Net_TrustedVPN I would very much appreciate if somebody could explain why.

Member Since	‎11-20-2017 07:40 AM
Date Last Visited	‎12-27-2018 12:40 AM
Posts	33

User Statistics

User Activity

RV340 only one Subnet per VPN Tunnel

RV340 and ASA

U Turn from Anyconnect clients to remote Site to Site VPN

AnyConnect to Internal and Site to Site VPN

Site To Site VPN MM_WAIT_MSG6

Re: RV340 only one Subnet per VPN Tunnel

Re: RV340 and ASA

Re: RV345P - multiple subnets in site-to-site VPN

Re: RV345P - multiple subnets in site-to-site VPN

Re: AnyConnect to Internal and Site to Site VPN