Hi,
as per the topic title is there a command that will allow me to display the traffic stats of a l2transport interface or is this achievable only through SNMP?Thanks a lot
Hi,
I am trying to configure SNMPv3 on ios-xr 7.9.21, and I am a bit confused about the role of the community string in SNMPv3, I thought that v3 had an user based model and that community_strings were a SNMP v1/2 concept but when I try to enter the ...
Hi,
in our network we're utilizing an ASR9k as BNG, running 7.3.2. Due to network design, the interfaces of the router that connect to the network's core are also utilized in the Generic-interfaces-list.
This means that whenever we perform maintenanc...
Hi,
as per the title, after we upgrade a NCS5508 to 7.7.21 from 7.3.2, the standby RP can no longer be utilised, it goes in a boot loop.What I've observed is the following:
The RP can bake the XR image successfully however at the end I see this in th...
Hi,
I am working with a topology made up by 4 routers: A, P,B and C.
Routers A, P and B have OSPF and MPLS running between them. Router C is directly connected to B, runs no routing protocols and has a default route that points towards B. Router B an...
Hi Antoine,
I am doing fine thank you, hope the same goes for you.I've tried to reimagine the RP1 with the cli provided but nothing changes. The RP bakes the XR images successfully, for a short while after that (roughly 15-20 second) the RP role chan...
I figured this out:
In MPLS LDP configuration, all the 3 routers (A,P and B) were configured to allocate labels only for host routes since I was pointing to a non host route no LSP was created and thus the ping failed:
mpls ldp
log
neighbor
nsr
...
Hi,
thanks for sharing the outputs. In my case the problem seems to be that Router P (R2 in your lab) has no label for the network between B and C (R3 and R4) it knows the network from OSPF but it hasn't assigned a label to it.Looking at router P:
sh...
Hi Harold,
Router A is an ASR9k running 7.3.2, Router P is a NCS 5508 running 7.3.2 as well. Router B is another 9k running 7.9.21.The CEF output shows that something might not be right. I configured both static routes towards router C, one with next...
