About nonamer15

nonamer15 · 06-17-2020

I have the below topology. What I'm trying to do is forward traffic coming from 192.168.1.73 destined for 192.168.1.222 port 53 to 10.1.5.1. Ideally, I'd like the firewall to keep the source IP intact on the request. When 192.168.1.73 sends a reques...

nonamer15 · 10-12-2019

I'm trying to find a way to drop any traffic that is not sourced correctly. I have a router that has a cellular connection via a carrier (AT&T/Verizon). AT&T isn't picky about incorrectly sourced traffic. However, Verizon is and after so many source ...

nonamer15 · 10-12-2019

Below is the topology I have. From server1, I'm able to SSH to the VLAN2 IP of sw1. However, when I create a VLAN3 interface and assign an IP to it, I'm no longer able to SSH to the VLAN2 IP of sw1. I'm still able to reach it via ICMP, though. SSH/IC...

nonamer15 · 09-04-2019

I have a C891F-K9 router running 15.3(3)M5. I have no SSH/Telnet access and am only able to access it via SNMP. On a device similar to it, I'm trying to enable Telnet by sending SNMP requests to it to tell it to copy a file into its running configura...

nonamer15 · 04-24-2019

I've got an NCS 55A2 router running 6.5.1. The Ubuntu server is running 18.04.02 LTS. I'm trying to SSH from the router to the server, but it keeps failing. Below are the error messages I'm seeing on both sides.---router--- ssh_xr[68394]: %SECURITY-S...

nonamer15 · 07-26-2020

Is it correct to say that if an ASA-K9 was ordered, you could still run FTD? In this scenario, you wouldn't have been able to order the URL Filtering license, because that option would only prompt for an NGFW-K9. However, I'm assuming if you decided ...

nonamer15 · 07-25-2020

Marvin, Does that mean that the ASA-K9 PIDs are incapable of running FTD whereas the NGFW-K9 PIDs can run either ASA or FTD? I've been looking at a Firepower 1010 and trying to understand the difference between FPR1010-ASA-K9 and FPR1010-NGFW-K9. I'...

nonamer15 · 06-17-2020

Thanks Georg. Not sure why it never occurred to me to use the ZBF, especially since it was already in place. I don't believe the ACL you provided would work given it wouldn't allow the IPSEC tunnel to build. EIGRP only occurs within the tunnel, not o...

nonamer15 · 10-13-2019

Thanks for the response, Paul. However, this solution won't work. Once I implemented it, it breaks the tunnel. I can't reach the Tunnel50 IP via ICMP, EIGRP adjacency goes down, and I'm no longer receiving any routes in the red VRF.<Default route is ...

nonamer15 · 10-13-2019

It would seem that routing between VLANs is still allowed as long as there are VLAN interfaces configured. no ip routing seems to only disable dynamic routing. I'm not sure this is true. You said you tested in a virtual environment and I've done so...

Member Since	‎03-13-2018 01:04 PM
Date Last Visited	‎07-29-2020 12:06 AM
Posts	62

User Statistics

User Activity

Forward Traffic on ASA

Dropping Traffic Not Sourced Correctly

Unable to SSH to VLAN IP After Creating Another VLAN Interface

Unable to Copy File via SNMP on Cisco IOS

Unable to SSH from XR Router to Ubuntu Server

Re: Diffrence between FPRxxxx-ASA-K9 with FPRxxxx-NGFW-K9

Re: Diffrence between FPRxxxx-ASA-K9 with FPRxxxx-NGFW-K9

Re: Dropping Traffic Not Sourced Correctly

Re: Dropping Traffic Not Sourced Correctly

Re: Unable to SSH to VLAN IP After Creating Another VLAN Interface