About ciscoguy88

ciscoguy88 · 04-19-2021

Hi, May I know in our internal extension calling, can we separate it by translation pattern but using same partition and CSS? Example: internal extension call 1XXX and 2XXX with the XXX could be the same number? Can this work if the partition between...

ciscoguy88 · 10-21-2020

Hi Guys, Would like to check, for my above router, currently I have a card which is connected to ISDN line Would like to check this current pstn gateway if I add a few more card for a few more ISDN line is it possible? My current ISDN is ISDN30 and i...

ciscoguy88 · 10-13-2020

Hi, We are trying to create a SIP trunk betweeen 2 CUCM in 2 country. The other version is higher than our side. Network is already establish and we can ping and telnet the other side CUCM. May I know how do I check SIP trunk status in CUCM version 8...

ciscoguy88 · 10-05-2020

Hi, Have some issue with my cisco unity connection 8.6. We did a reboot on the server as it was loading slowly on the web and now after reboot the service manager is not able to restart. Anyone know where can I find the recovery iso for this CUC ver...

ciscoguy88 · 09-23-2020

Hi, Can I check whether this is achievable? We have actually create the SIP trunk between this 2 but not able to call each other.Our CUCM version is 8.02.40000-1. So was wondering will this work.Is there any version compatibility issue or device com...

ciscoguy88 · 04-21-2021

Hi Roger, Nithin, Thanks both for your help. Sorry for above as I myself is a beginner in this. So basically I found out actually we do not have any translation from VG to our CUCM. So we receive full number from VG to our CUCM. But in CUCM, we did h...

ciscoguy88 · 04-20-2021

Hi Nithin, Roger, Below is the translation rules in the gateway and dial peers: I did not add 24588... as rule 2 in the voice translation as this is a new ISDN number. Should I add it as rule 2 and put ^1\(...\)/ /24588\1/ ? voice translation-rule 1...

ciscoguy88 · 04-19-2021

Hi Nithin, Appreciate your prompt reply. When people call 24589100 it will go to 24588100 as well. Not sure what went wrong on this. 24589100 is like a new ISDN number we just subscribe. My VG we put dial peers as 24589XXX same as 24588XXX. When som...

ciscoguy88 · 04-19-2021

Hi Nithin, Yes, now understand this is different for internal. Actually what I trying to achieve is for external calling in. Now my full number from telco for ISDN is example XXXXXX100 and YYYYYY100. When I try call from external to internal, not s...

ciscoguy88 · 04-19-2021

Hi Roger, Noted on that. Let me try out with different partition and CSS.

Member Since	‎04-03-2018 11:13 PM
Date Last Visited	‎04-29-2021 06:54 AM
Posts	30
Total Helpful Votes Received	15

User Statistics

User Activity

How to separate 3 digit extension for internal call

Cisco 2921 pstn gateway

CUCM 8.6.2 SIP Trunk status

Cisco Unity Connection 8.6

Creating SIP trunk between CUCM and Grandstream UCM6510

Re: How to separate 3 digit extension for internal call

Re: How to separate 3 digit extension for internal call

Re: How to separate 3 digit extension for internal call

Re: How to separate 3 digit extension for internal call

Re: How to separate 3 digit extension for internal call