I keep revisiting setting up rdp over VPN with a pix 506e. It works, then fails, I give up, try again, etc... Anyway, I am able to establish the vpn. However, I can't consistently connect to one of the machines on the inside. Here is my config an...
I've tried setting up the ASA 5505 multiple times. I am able to access the server from a client but cannot access the internet. As of right now, I have no need to set up a dmz, only inside and outside interfaces. I've also tried different cables b...
I can connect to the vpn but I am having trouble accessing anything on the inside. Any help is appreciated.interface ethernet0 autointerface ethernet1 100fullnameif ethernet0 outside security0nameif ethernet1 inside security100enable password ****cl...
I'm trying to configure an ASA 5505 with a dmz for a web server. I finally learned how to do this on a pix but am having trouble setting this up on the asa. Any advice or possible configuration examples?
I have a 501 with a VPN set up. Once the VPN is established, I rdp to an internal server. Usually, I have no problem; I can connect repeatedly from either my desktop or laptop computers. The problem is that after another user connects RDP and disc...
Terminal Server is on the inside - 10.1.1.2 directly attached to the pix. There is another nic on the server - 192.168.1.95 - which is attached to my internal network subnet.
I can't believe how easy that was. Many thanks. One question I have is why would I use "nat(Inside) 5 0 0" and "global(Outside) 5 interface" as opposed to "nat(Inside) 1 0 0" and "global(Outside) 1 interface? "
