About mike

mike · 06-09-2014

I have a Cisco ASA 5505 that I am trying to configure a web server on a DMZ. I have the DMZ interface working, but I am not able to get access from to the server connected to the DMZ interface. I have been looking for a week now on google, but haven'...

mike · 08-22-2012

I have a Cisco 2851 router with Cisco Unity Express 7.0.3 and IOS version 12.4(24)T2 and CME 7.1The problem is this...When someone from the office calls an outside number, the number on the other end via caller ID shows only the main number. Not the ...

mike · 03-19-2012

I am going to be setting up a site-to-site VPN connection between 2 locations. Site A is local and site B is remote. Site B is another company that will be running software on a server at Site A. I do not have access to any of the equipment at site B...

mike · 08-21-2011

Good afternoon all,I have a client that I am trying to program a Gai-Tronic Titan Phone on thier Cisco phone system. The system has the following:Cisco 2851 Revision 53.51IOS Version 12.4(24)T2CME Version 7.1Unity Express 7.0.3Anything I do in CME is...

mike · 06-09-2011

I have a client that I setup a pickup group for. I have 5 phones with the same group number. If, let's say Joe is on the phone, and has an incoming call, how does Jane see that incoming call and answer it. Right now, it ends up going to Joe's voicema...

mike · 06-10-2014

I was able to get everything working. You pointed me in the right direction. I appreciate the help.It ended up being ACL's that took care of most of it.Thanks

mike · 06-10-2014

Thanks for the info Marvin. After some time last night, I was able to get the following working...Outside to DMZ via port 3389Outside to DMZ via port WWWDMZ to Outside for internet browsing I am still having issues getting the DMZ to talk to the DB s...

mike · 06-09-2014

Thanks for the quick reply Marvin. After you verified the incoming outside traffic needing the NAT and ACL, I looked those over again, and found the problem. I was able to get the RDP to the server on the DMZ port working. Still need to put in the WW...

mike · 09-05-2012

Thanks for the help Chris. Unfortunately the telco is telling us that they can't do anything without setting up some sort of 911 database with a charge of more than $1500 per month.I am going to mark your answer as correct. I appreciate all your help...

mike · 08-22-2012

Thanks Chris!You are correct in that the number is still showing the BTN or main number of 5638755500. I was hoping I was seeing that it was working properly on my side. I will contact the telco and start leaning on them. If I have any questions, I w...

Member Since	‎01-26-2011 08:11 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	25

User Statistics

User Activity

Configuring a DMZ on ASA 5505

Outgoing Caller ID

VPN w/overlapping networks

Third Party SIP Phone Config

Pickup Groups

I was able to get everything

Thanks for the info Marvin.

Thanks for the quick reply

Outgoing Caller ID

Outgoing Caller ID