Dear community,
We have the following issue and hope someone can help:
We have a huge network (over 200 Vlans) 50 cisco switches (incl. , 12 cisco core switches), 12 servers, 2 ASA 5550,and,.....
Our homepage is hosted by an external company a...
Dear community,
We have the following issue and hope someone can help:
We have a huge network (over 200 Vlans) 50 cisco switches (incl. , 12 cisco core switches), 12 servers, 2 ASA 5550,and,.....
Our homepage is hosted by an external company a...
Dear all,
Sorry, I posted the same in discussion and thought I will also post it here, sorry again
I need to stop clients from accessing Cpanel ports outside our network.
The issue we have is that our home page is hosted by an external company and...
Dear all,
I need to stop clients from accessing Cpanel ports outside our network.
The issue we have is that our home page is hosted by an external company and they use Cpanel to do that.
At the moment, our homepage is down because our outside IP-Ad...
Dear all, I’ve configured 2 ASA 5550 active / standby (both with SFP module), they work very well when both of them are connected but as soon as I switch off one of them (to test the failover) then the running one tells me “ can’t find mate “ which i...
Many thanks mattjones03, I'll give it a try and report back.
The ACL worked perfectly (got about 80 hits after 30 mins) and the homepage is working again, you are a star.
So, that’s why I would like to know which source is causing this and stop it or...
Many thanks for the prompt reply. Spoke to cisco and they recomend to format the flash and reload everything back, so I've saved the license kay and the config.I would like to try this on a new flash card (4GB) and not touch the existing one,I know I...
Many thanks Karsten, I've already the 8.2(5), please have a look at the sh version from the ASA 5550: MAIN-ASA# sh verCisco Adaptive Security Appliance Software Version 8.2(5)Compiled on Fri 20-May-11 16:00 by buildersSystem image file is "disk0:/asa...