5220

Hi,Not the VPN client, however the Anyconnect client does:Start Before Logon (SBL)-Allows for login ...

Hey,All versions of VPN clients starting 4.0 supports:•Cisco PIX Firewall, Version 6.2.2(122) or V...

Hi,On the ASA the VPN tunnels are created by matching a specific access-list (source, destination, p...

Hi Victor,Let me try to explain what active/active means. Basically, you have two devices passing co...

Hi,PIX 506E does not support 7.x IOSCheers,Daniel

Hi,No, the PIX will not allow you to set that up (at least not the 6.x IOS).You can use device like ...

Hi,1 millisecond failover is more than you can hope on a network environment.However, from your conf...

When the problem is experienced on users, does the DNS work on Proxy?Check this to isolate if this i...

Hi John,As I said, you either need to use two devices, or an ASA in multi context mode (creating two...

There is alot of hype on this topic.At the moment there isn't an 64-bit Windows IPSEC client: The Ci...

Hi Victor,There is alot of hype on this topic.At the moment there isn't an 64-bit Windows IPSEC clie...

Hi,You need to have two network devices( routers, ASAs and so on). Connect each network device to ea...

Hi,I don't think there's a fixed number.It depends on the amount of memory you have on the ASA.Howev...