5220

5220 · 08-05-2008

Hi Nitin,Could you check withe the Checkpoint Firewall admins to get the port they use for UDP encap...

5220 · 08-02-2008

Hi,I had a similar issue in the past with the secondary PIX disconnecting from all network connectio...

5220 · 08-02-2008

Hi,Most probably is an PIX OS bug.Try checking the version release notes to see if this bug is noted...

5220 · 08-02-2008

Hi,A good document:http://www.cisco.com/en/US/prod/collateral/iosswrel/ps6537/ps6586/ps6635/ps6659/E...

5220 · 08-02-2008

Hi Nitin,Now i got it.Probably what happens is the ASA will only allow ISAKMP packets, and not the p...

5220 · 08-01-2008

Hi,Where is the problem? With the site to site or the VPN client.What happens usually when you have ...

5220 · 08-01-2008

Hi,Do you use the Checkpoint VPN client to connect to the ASA? Why don't you use the Cisco VPN clien...

5220 · 07-31-2008

Hi,If the servers are all on Inside interface and they only need to access the Internet (servers ini...

5220 · 07-31-2008

Hi,Apparently only 870 supports it (functions as DMVPN spoke only):http://www.cisco.com/en/US/prod/c...

5220 · 07-31-2008

Hi,Tunnel-group is not required in 6.x as you use the command vpngroup.NAT is detected automatically...

5220 · 07-31-2008

Hi,Yes, the L2TP can be encapsulated in IPSEC like any other traffic.However, make sure no NAT is pe...

5220 · 07-30-2008

Right, the problem might be on the router.Try to disable the CEF "no ip cef" and check again.Please ...

5220 · 07-30-2008

Hi,To be honest the config looks ok.Only one thing, you should put the crypto map to be /24, not /16...

5220 · 07-30-2008

Hi,The ISAKMP proposals have a seq number.The device (ASA/Concentrator) receives the request from th...

5220 · 07-30-2008

Hi,This is nothing to worry about. I think that by default the VPN devices are replying to ISAKMP re...

Date Registered	‎09-21-2005 07:26 AM
Date Last Visited	‎01-17-2021 03:52 PM
Total Messages Posted	360
Total Helpful Votes Received	456

Re: VPN Client Issue