About ssambourg

ssambourg · 12-16-2020

Hello, I try to import Switch Software images from cisco.com into Cisco Prime Infrastructure 3.8. CCO account and EULA are authenticated and validated. The job failed with this : Failed to get response CCO The image recommendation is working fine for...

ssambourg · 03-26-2020

Hello, I have a problem on Prime Infrastructure 3.6 last patch. For some switches, clients appears for others switches clients don't appears. I check that there is connected client on theses switches where client don't show up in Prime and mac-addres...

ssambourg · 03-04-2020

Hello, We upgraded FMC from 6.2.3 to 6.4.0.8. After this upgrade, we started to create prefilter rule (no one prefilter rule before). Under 'Port' tab, the available port section stays in Loading state. I don't see this behavior under ACP rules. Anyo...

ssambourg · 09-17-2019

Hello, I'm using a Cisco Prime Infra 3.6 (Patch 2). I have the same problem with two "WS-C2960S-24TS-L" version 12.2(53)SE2 for the first and 15.2(2)E9 for the second one. I am using SNMP v3 (MD5/AES128 and try at first with AES258). But the problem ...

ssambourg · 07-01-2019

Hello, I'm tryining to use Cisco Support API for PSS. After reading :Devnet getting started : https://developer.cisco.com/docs/support-apis/#!getting-started-with-cisco-support-apis-for-pssAPI Console User guide : https://apiconsole.cisco.com/files/A...

ssambourg · 10-25-2022

Même problème avec Windows 11. La solution fournit ici que l'on retrouve dans la release note est également applicable pour Windows 11. https://www.cisco.com/c/en/us/td/docs/security/asdm/7_18/release/notes/rn718.html#id_25476

ssambourg · 12-17-2020

Hi, it was the EULA on this link. Strange because EULA was accepted from PI software image import menu. Thanks for your help

ssambourg · 12-16-2020

After checking show security-status, I saw that the FIPS is disabled.

ssambourg · 12-16-2020

Hi, As explained, the image recommendation generation works well, so I assume that it can reach www.cisco.com. So the wget finish with a HTTP 200 OK as expected. If there is a Firewall issue, the software image recommendation generation won't be OK...

ssambourg · 12-16-2020

This is the same firewall rule used by the PI3.8 and the device in the same subnet than PI3.8.I checked at first the firewall log and the traffic passed with the success.

Member Since	‎02-26-2009 09:34 AM
Date Last Visited	‎10-20-2022 09:52 AM
Posts	90
Total Helpful Votes Received	26

User Statistics

User Activity

Prime Infrastructure 3.8 : Unable to download software image from cisco.com

Prime Infrastructure 3.6

FMC 6.4.0.8 Prefilter Rule available port still in loading state

SNMP Connectivity Failed but SNMP Walk (partially) OK

Unable to get aToken from Cisco Support API

Re: ASDM « cette application ne peut pas fonctionner sur votre PC » -

Re: Prime Infrastructure 3.8 : Unable to download software image from cisco.com

Re: Prime Infrastructure 3.8 : Unable to download software image from cisco.com

Re: Prime Infrastructure 3.8 : Unable to download software image from cisco.com

Re: Prime Infrastructure 3.8 : Unable to download software image from cisco.com