About Mohammed Attif Qasim Bazi

Mohammed Attif Qasim Bazi · 02-22-2012

I have 4710 ACE load balancer with three virtual contexts, i have configured the three contexts with the syslog configuration to send the logs to a syslog server as below:logging enablelogging trap 5logging buffered 7logging host 10.x.x.x udp/514I ca...

Mohammed Attif Qasim Bazi · 02-21-2012

I have 4710 ACE load balancer with three virtual contexts, i have configured the three contexts with the syslog configuration to send the logs to a syslog server as below:logging enablelogging trap 5logging buffered 7logging host 10.x.x.x udp/514the ...

Mohammed Attif Qasim Bazi · 10-23-2011

there is packets drops in the access switch interfaces which connect to the IP phones which cousing call disconnet or unclear voice. below some show command from the switch and for example i choosed interface 1/0/8: GigabitEthernet1/0/8 is up, line p...

Mohammed Attif Qasim Bazi · 12-20-2010

Router 2 receiving source attack from two sources in OSPF area 1. Need to find these Two sources and block their traffic before they enter into OSPF area by using proper access-list. The traffic from other networks should not b...

Mohammed Attif Qasim Bazi · 12-20-2010

there is an attack coming to my router from interface eth 0/0 i want to protect my router by block the attacker from entering the ospf area using an access-list.

Mohammed Attif Qasim Bazi · 10-25-2011

Hi Alexanderqueuee 2 threshold 1 is the default for dscp 0 traffic now femstf-tc1-ad-acc#sh mls qos maps dscp-output-q Dscp-outputq-threshold map: d1 :d2 0 1 2 3 4 5 6 7 8 9 ------------------------...

Mohammed Attif Qasim Bazi · 10-24-2011

femstf-tc1-ad-acc#sh mls qos maps dscp-output-q Dscp-outputq-threshold map: d1 :d2 0 1 2 3 4 5 6 7 8 9 ------------------------------------------------------------ 0 : 03-01 02-01 02-01 02-01...

Mohammed Attif Qasim Bazi · 10-24-2011

Actually this configuration done by someone alse and I am trying to stop the packet drops, what is I try to remove the mls qos srr-queue output dscp-map queue 3 threshold 1 0 command from the switch and do the test again??

Mohammed Attif Qasim Bazi · 10-23-2011

hi joseph thanks for you answer,Actually PQ not enabled and the IOS version is " flash:c3750-ipbasek9-mz.122-50.SE3.bin"which soulution you think will be the best to solve this issure with modifing the existing configuration ??

Mohammed Attif Qasim Bazi · 06-30-2010

Ok can I see which user is connect to that port which go up/down, I mean is it possible that I can now the user IP address ???

Member Since	‎12-07-2009 02:15 AM
Date Last Visited	‎02-13-2020 09:59 AM
Posts	30

User Statistics

User Activity

Cisco 4710 ACE syslogs generating issue

Cisco 4710 ACE syslogs generating issue

output packets drop due to QoS configuration

source attack

source attack

output packets drop due to QoS configuration

output packets drop due to QoS configuration

output packets drop due to QoS configuration

output packets drop due to QoS configuration

Re: MARS switch port up/down rule