About ney25

ney25 · 03-04-2010

Hi NetPro.Currently i doing the IOS patching for Cat4k switch, however i am facing some problem after the switch rebooted . this Cat4k doesn't reload with the new IOS. i have tried 2 times but still can't boot up the new IOS.your reply will be highly...

ney25 · 11-05-2009

Hi NetPro.would it be possible if i wanna configure the switch to send alert / alarm while the CPU Utilization hit to 50% - 80% to my monitoring server ? i have check with the monitoring administrator , he was mentioned must give him " MIB " . thus i...

ney25 · 09-02-2009

Hi NetPro,Does anyone know how to solve this ? My switch 3750 down with this error msg. your reply will be highly appreciated.%TCAMMGR-3-HANDLE_ERROR:cam handle [hex] is invalidThe CAM Handle used by the caller is not valid.Recommended Action: Copy t...

ney25 · 08-19-2009

Hi NetPro,i've loaded the VeriSign Cert but somehow i still hitting the major problem.Scenario 1:Company A recommend CN = test-radius-01@google.comVeriSign recommend CN = test-radius-01.google.combut, while in the UAT stage . Cert with "CN = test-rad...

ney25 · 07-28-2009

Hi NetPro,After IOS upgrade , this AP can not Associate anymore.Previous IOS version : flash:/c1240-k9w7-mx.123-7.JA5/c1240-k9w7-mx.123-7.JA5Proposed IOS Version : c1240-k9w7-tar.124-10b.JDA3.tarAP Model : AIR-AP1242AG-E-K9Interface ...

ney25 · 03-04-2010

Hi Jon.Yeah , you're write. i have changed it to 0x2102 . it's work now.Thanks a lot.Have a nice day .

ney25 · 03-04-2010

Hi Karuppu.Thanks for sharing. yeah .. it should be work then.

ney25 · 11-10-2009

Hi Lavramov.Good Day, would you mind to guide me the easiest way ? as i have tried out but don't seems to be work.Switch Portion : i want to monitor the CPU utilization if CPU hit to 30% - 50%. then it will trigger the alarm and send to Netview. so, ...

ney25 · 08-21-2009

Hi,Thanks for your information, yes UAT stands for User Acceptance Test.I've installed the CA cert on the ACS Server. thanks a lot.

ney25 · 07-27-2009

Hi,Finally i manage to find the Default Gateway Setting which under the Report tab --> Appliance Status.now if i wanna change my default gateway using GUI . would it be possible ?your reply will be highly appreciated.thanks a lot.

Member Since	‎03-17-2004 12:56 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	396
Total Helpful Votes Received	25

User Statistics

User Activity

cisco WS-C4507R (XPC8245) Failed in IOS upload.

SNMP - MIB

%TCAMMGR-3-HANDLE_ERROR: cam handle [hex] is invalid

ACS 4.2 Appliance Server 1113 with VeriSign Cert

AP IOS upgrade and can't associate ?

Re: cisco WS-C4507R (XPC8245) Failed in IOS upload.

Re: cisco WS-C4507R (XPC8245) Failed in IOS upload.

Re: SNMP - MIB

Re: ACS 4.2 Appliance Server 1113 with VeriSign Cert

Re: ACS 4.2 Appliance Server 1113 , Checking Default Gateway in