About contech-nelsong

contech-nelsong · 03-01-2010

I am getting the following error message from two devices on my network:CRYPTO-4-RECVD_PKT_MAC_ERR: decrypt: mac verify failed for connection id=<removed> local=<removed> remote=<removed> spi=F1E30F16 seqno=0000905DCisco decodes the message as:%CRYPT...

contech-nelsong · 02-24-2010

Hi,I have a client who wishes to use a single T1 to carry data and voice between sites.I believe I can use the VWIC2-2MFT-T1/E1 to split the T1 into data channel & TDM voice groups, but I'm kind of struggling with the concept.I'm good on data, but do...

contech-nelsong · 03-03-2010

fix your typo first...."secondary"

contech-nelsong · 03-03-2010

Have a look at this page: http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800946a4.shtml#tshootIt may not describe exactly what you are doing, but it has a good troubleshooting section and describes how you...

contech-nelsong · 03-03-2010

That's almost cetainly failing now because of the overlap in networks.once the 172.28.53.0/25 network traffic hits the 172.28.0.0/16 network it wont have a return path simply because the router thinks that network is directly connected.You have to NA...

contech-nelsong · 03-02-2010

if you ping it from the same vlan then the arp response should come from the affected server and not the router, which should fill the cam table correctly

contech-nelsong · 03-02-2010

the arp timeout is longer than the mac-address-timeout.your assumption is correct, the arp entry is stale.

Member Since	‎01-27-2010 07:36 AM
Date Last Visited	‎08-18-2017 03:53 AM
Posts	34
Total Helpful Votes Received	10

User Statistics

User Activity

Error Message Decode Help Needed

Splitting T1 into Data & Voice using VWIC2-2MFT-T1/E1

Re: Spanning-tree question on a pair of 6509 and HP BL p-class G

Re: Lan-to-Lan VPN - Access to certain ports only

Re: Site to Site VPN ASA5505 and Cisco 3825

Re: ARP Cache vs Mac-address-table

Re: ARP Cache vs Mac-address-table