About rakuten02

rakuten02 · 02-20-2024

I have a 9300 switch with an Essentials license. It has a limitation of 1000 OSPF routes.Will there be a log to indicate that this limitation has been hit? I could not find any information on this.When I do show ip route summary to check the total nu...

rakuten02 · 01-10-2024

Hi all, are there any Cisco AP models with downtilt internal antennas? I checked through a few Cisco 9100 series APs data sheets but did not find any.I see that Aruba has such APs, and it appears to work well in difficult environments without resorti...

rakuten02 · 03-28-2023

Why is Router B able to receive OSPF updates for 192.168.234.0/24 from Router A when it is denied by the filter list? Network Topology: Router A - Switch 1 - Switch 2 - Router BRouter B:router ospf 192router-id 192.2.102.9area 192 filter-list prefix...

rakuten02 · 03-25-2022

Recently, there are power supply failure logs in my Cisco switch.%PLATFORM_ENV-1-FRU_PS_ACCESS: FRU Power Supply is not responding%PLATFORM_ENV-1-FRU_PS_SIGNAL_FAULTY: POWER_GOOD signal on power supply 1 is faulty%PLATFORM_ENV-1-FRU_PS_SIGNAL_OK: POW...

rakuten02 · 03-23-2022

The network topology is Router A - Router B - Router C. Router A has 2 static routes to Router C. ip route 209.112.64.5 255.255.255.255 116.55.177.57ip route 209.112.64.5 255.255.255.255 113.165.26.155interface 0/0 configured with 116.55.177.58. (c...

rakuten02 · 02-24-2024

it is due to the essentials license limitation, not the hardware.https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9300-series-switches/nb-06-cat9300-ser-data-sheet-cte-en.html#Softwarerequirements

rakuten02 · 02-24-2024

I do not see any logs related to exceeding OSPF routes limit.. It could be only shown at the start when OSPF was enabled. I am not sure.Oh thanks, what do you mean by summary? I configured a default static route 0.0.0.0 0.0.0.0 192.168.3.1, but I am ...

rakuten02 · 02-24-2024

Thanks all! Please ignore the command output in my question, I took it from a Cisco Reference page as an example.The total number of prefixes is 2948 when I do show ip ospf dtatabase.show ip ospf shows AS LSA as 2948 as well.From show ip route summar...

rakuten02 · 03-29-2023

Oh I see, thanks! So the filter list does not apply for Type 1 & 2 LSAs, hence the 192.168.234.0 routes were still being learnt in the RIB. The only way is to use distribute-list filtering to perform the filtering.

rakuten02 · 03-28-2023

Oh, it was a typing mistake on my part. I've fixed it, thanks!

Member Since	‎12-20-2015 12:25 AM
Date Last Visited	‎02-23-2024 12:04 AM
Posts	45
Total Helpful Votes Received	19

User Statistics

User Activity

9300 Essentials license, 1000 OSPF routes.

Cisco AP with downtilt internal antenna

Router receiving OSPF updates despite deny in filter list

Power supply logs identification

Static routing to same destination IP does not failover

Re: 9300 Essentials license, 1000 OSPF routes.

Re: 9300 Essentials license, 1000 OSPF routes.

Re: 9300 Essentials license, 1000 OSPF routes.

Re: Router receiving OSPF updates despite deny in filter list

Re: Router receiving OSPF updates despite deny in filter list