Hello I need help
after applying PBR to VLAN interface on my switch, I cant ping 192.168.0.51 and 192.168.0.30 neither form switch nor from other networks connected to switch
interface Vlan192ip address 192.168.0.1 255.255.255.0 no ip proxy-arp ...
Hi Could anyone help me?My simplified scenario is:I have two iBGP neighbor neighbor X.X.X.Xand neighbor Y.Y.Y.YI am redistributing BGP into OSPFand I need neighbor X.X.X.X to have lower metric than Y.Y.Y.Y in OSPF domainhow can I solve this?thank you...
Hi Could anyone help me? there is a VPN client PC with Public IP address (without NAT router), it can connect to EZVPN server and recive reoutes but traffic is not passing,
Hello could anyone help me? I created VTI tunnels between HO and branches HO is 3925 and branches are 881 and 871, configuration is very basic and when traffic pass through tunnel ping rises very heavily from 200 to 1000 ms, CPU on 881 and 871 is...
Hello could anyone help me? I have got 2 catalist 520 series switch on my network and they have created its own autonomous RSTP and one of them is root bridge and they are not communicating with other cisco switches could anyone tell me what could be...
Hello, this is configuration and diagram
==========================
no ip domain lookupip domain name gino.geipv6 multicast rpf use-bgp!!!!!spanning-tree mode rapid-pvstspanning-tree extend system-idspanning-tree vlan 1-110,112-500 priority 24576span...
Hello, I have L3 switch, several interface VLAN-s are configured there, for example one network is 192.168.1.0/24, another is 192.168.0.0/24, host 192.168.0.51 is mail server so it should have next hop 10.100.100.2 default gateway for switch is 10.10...
