About Steve Graham

Steve Graham · 05-17-2010

I would like to get a consensus about the best way to utilize 2 ISPs on the same Internet router. We currently have an Internet router that connects 1 ISP via a multi-link across our Serial interfaces. We now have a new ISP that we would like to be...

Steve Graham · 03-12-2008

All, I have backed myself into a corner with a command I entered yesterday in my ASA. The command entered was:aaa authorization command TACACS+ LOCAL And it locked me down so tight that I can't even go into "conf t" or run a "sh run" command any lon...

Steve Graham · 03-10-2008

All, I am seeing some odd things in relation to how our smtp gateway is sending information out across the Internet. When I do a show xlate it shows that it is using the global PAT of our primary ISP. However, I have a static NAT assigned to it ove...

Steve Graham · 03-06-2008

I am having trouble getting ping to work for my inside networks through my outside interface. Is there a recommended approach for allowing this to traverse from an inside interface to an outside host beyond our network?

Steve Graham · 03-03-2008

How can I build an exception for allowing users on the inside to access a web server on port 80 in the DMZ? They cannot do this now because, in my opinion, the server is going through a NAT to the public address, so how can I set it up where any req...

Steve Graham · 05-31-2012

The simple answer is yes, however, without the details of what you are trying to accomplish with these 3 switches, it's hard to give you the necessitites you may need prior to making your decision.I'm going to assume these 3 swtiches host 3 different...

Steve Graham · 05-24-2012

Absolutely! Comes in handy when wanting to change configs on multiple devices in your environment, i.e. changing enable secret, updating snmp configs, etc.Enjoy.

Steve Graham · 05-24-2012

Andy, I'm not sure by your question if you were looking for free software or simply software that does this. Solarwinds NCM is a great tool for pushing scripts to network devices. Very useful tool, however, it will take some investment to deploy, b...

Steve Graham · 05-17-2010

To answer some of the unknowns referenced in your response:"But is it not clear whether this is different from what you do with the old ISP or is the same."Currently, all outbound and inbound traffic traverse ISP1, since it is the only ISP in our env...

Steve Graham · 03-12-2008

Added a user in ACS with privilege level 15 access and in the Shell Command Authorization Set" section, checked "Per User Command Authorization" and then selected the "Permit" radio button. Submitted changes. Logged in as new user I just setup and ...

Member Since	‎12-06-2004 08:56 AM
Date Last Visited	‎10-09-2017 11:37 AM
Posts	30
Total Helpful Votes Received	5

User Statistics

User Activity

PBR with 2 ISP's

ASA - Command Authorization Failed

Mail smtp using PAT instead of static NAT assigned

Ping from inside to outside

No NAT DMZ web server when accessed by inside users

Connecting Multiple switches to a Single Firewall

Script a "wr" command to many switches?

Script a "wr" command to many switches?

Re: PBR with 2 ISP's

Re: ASA - Command Authorization Failed