About Jayesh Singh

Jayesh Singh · 03-17-2019

There is a difference between something you know and something you understand. Recently, I came across such kind of a situation, when I realized I perfectly knew how to configure Inter VRF communication in ACI, but the in-depth understanding was miss...

Jayesh Singh · 02-23-2019

I come across lot of questions on ACI fabric access policies and steps involved in on-boarding a physical server into ACI. While there are lots of helpful documents available online, which are based on Cisco Official ACI configuration guides, still i...

Jayesh Singh · 10-05-2023

Try -S flag to define your source, LEAF-01# iping -V prod:web-vrf 192.168.201.2 -S 192.168.201.1PING 192.168.201.2 (192.168.201.2) from 192.168.201.1: 56 data bytes64 bytes from 192.168.201.2: icmp_seq=0 ttl=255 time=1.495 ms64 bytes from 192.168.201...

Jayesh Singh · 06-30-2021

Hi, This is an expected condition. Below is the snip from official document: Switch memory utilization of 70-75% is normal, even for leaf and spine switches in a new deployment where no configuration has been pushed. Switch memory utilization in ACI ...

Jayesh Singh · 06-05-2021

Hello Raza, There is a very interesting APIC cli command that provides detailed info about the VLAN pool, allocation(EPG or ext-svi) and free VLAN IDs. APIC01# show vlan-domain detail There are more options available with that command to narrow down ...

Jayesh Singh · 06-05-2021

Hello @Emurray123, In Cisco ACI, static routes are configured as part of L3Out. Static routes are configured on each Logical Node Profile under “Tenant > Networking > External Routed Networks > L3Out > Logical Node Profiles > Node > Static Routes”. ...

Jayesh Singh · 02-15-2021

Hello Rami, Please refer ACI Fabric L3out guide, that should help: https://www.cisco.com/c/en/us/solutions/collateral/data-center-virtualization/application-centric-infrastructure/guide-c07-743150.html Regards, Jayesh

Member Since	‎06-18-2018 05:15 AM
Date Last Visited	‎10-12-2023 10:44 AM
Posts	132
Total Helpful Votes Received	445

User Statistics

User Activity

Cisco ACI Inter VRF/Tenant Route Leaking Design – Simplified!

Connecting Physical Servers To Cisco ACI Fabric - Simplified!

Re: Is there a ping command in ACI environment?

Re: Fabric nodes in moderate-to-high memory usage without user traffic?

Re: Find all encap vlans configured & used

Re: Static routes in ACI

Re: ACI Dual L3Out same VRF