About Q5

Q5 · 09-20-2019

Hi guys I am doing some light reading of the documentation and I am having issues to understand how does one apply a service to multiple devices in one CLI (ex create Loopback interfaces and assign IPs to them).usually, you can apply a service to a d...

Q5 · 05-24-2019

Hi guysI am trying to get started with ZTP on AS9000v and I can't make it workApparently the router comes up with all the interfaces down and I need to manually login, add the user admin and then configure the Management interface for DHCP , do a no ...

Q5 · 04-30-2019

Hi guys I need to read about how to secure and control the access to Cisco Prime Infra APIs. Where can I read about this?

Q5 · 04-12-2019

Hi guys I am looking at using a network emulator and virtual devices (ex: EveNG or GNS3 or VIRL) and in these cases the devices could be accessed via a console port that can be accessed via telnet IP:Port where the IP is 127.0.0.1 and the port is all...

Q5 · 01-21-2019

Hi guys I have a couple of UCS m220 servers which used to work together in some sort of clusterThey were decommissioned and I am now trying to repuprose themI have never touched an UCS before and I just started reading about is Can anybody tell m...

Q5 · 09-24-2019

You hit the nail, that is what I was looking for, thanks!Related to this, I am using REST APIs to send this:<config><loopback xmlns="http://com/example/loopback"><servicename>R1Loopback</servicename><device>R1</device><loopback-intf-name>1111</loopba...

Q5 · 09-24-2019

Thanks Imanor that was almost exactly what I was looking for excepting one thing: I want or I need to assign different IPs for the loopback interface I am creating on each device, like so:R1 Loopback1 192.168.1.1R2 Loopback1 192.168.1.2R3 Loopback1...

Q5 · 09-23-2019

Pretty much what I was expecting..the only issue is that I am missing an example, I am a beginner with NSOUnless I get some help here I will have to figure out how this is done via the template logic by extrapolating some of the examples available

Q5 · 09-20-2019

That example is very complex and the many things done there tend to confuse the readerI went over the read me which shows how the things are done and configured and everything seems to be passed manually, discrete values I am looking for a CLI option...

Q5 · 08-20-2019

Thanks guys I figured out how to do it in the end. It was indeed a combinations of the above

Member Since	‎08-03-2018 08:17 AM
Date Last Visited	‎09-25-2019 12:21 AM
Posts	18
Total Helpful Votes Received	5

User Statistics

User Activity

How does one apply a service to multiple devices in one CLI (ex create Loopback interfaces and assign IPs to them)?

ZTP with IOS-XRv

Cisco Prime Infrastructure (WiFi) REST API Security and access control

How do I add a device with no authentication

Trying to repurpose UCS m220 previously used for something else; can't see anything on the external monitor

Re: How does one apply a service to multiple devices in one CLI (ex create Loopback interfaces and assign IPs to them)?

Re: How does one apply a service to multiple devices in one CLI (ex create Loopback interfaces and assign IPs to them)?

Re: How does one apply a service to multiple devices in one CLI (ex create Loopback interfaces and assign IPs to them)?

Re: How does one apply a service to multiple devices in one CLI (ex create Loopback interfaces and assign IPs to them)?

Re: ZTP with IOS-XRv