About VCsupport17

VCsupport17 · 02-06-2019

Hello Community, We have Cisco SX80 when we start a call we can see the far-end in full screen and o...

VCsupport17 · 12-23-2018

Hello community, We have SX80 version CE9 and we don't require Touch 10 to control the system since ...

VCsupport17 · 05-18-2018

Hi Richard, Thank you for your response. Actually, the client is located inside on VLAN 200 and acce...

VCsupport17 · 05-13-2018

Hello Richard, I have a quick question. If someone is using VPN client, does the PBR still work? We ...

VCsupport17 · 04-30-2018

Hello Cisco Community, I would like to ask regarding the Cisco Spark Room Kit. I saw the data sheet ...

VCsupport17 · 02-15-2018

Hi Richard, After checking on the users traffic, i can see PBR is working fine now. And also checkin...

VCsupport17 · 02-14-2018

Hi Paul, See below output

VCsupport17 · 02-14-2018

Hi Richard, Switch version is 03.06.06E. After removing the line set ip next-hop verify-availability...

VCsupport17 · 02-14-2018

Hi Richard,That's my issue now. I have applied the policy route-map on the int vlan 200 but it's not...

VCsupport17 · 02-14-2018

Hi Richard, Thank you for the additional information. The PBR is not applying on int vlan 200. What ...

VCsupport17 · 02-11-2018

Hi Paul,I can ping the source from int VLAN 200:C3850-Core-SW#pingProtocol [ip]:Target IP address: 1...

VCsupport17 · 02-11-2018

Hi Paul, I can ping the next hop 10.11.1.2 from Core switch. C3850-Core-SW#ping 10.11.1.2Type escape...

VCsupport17 · 02-11-2018

Hi Paul, Why the traceroute results shows like this? C3850-Core-SW#tRacerouteProtocol [ip]:Target IP...

VCsupport17 · 02-10-2018

Thanks Georg. Some users are on VLAN 200 and accessing the internet and I check with the commands bu...

VCsupport17 · 02-10-2018

Hi Paul, Thank you for helping and the commands provided. I tried the commands and how can I verify ...

Date Registered	‎08-25-2015 01:16 AM
Date Last Visited	‎03-04-2021 09:02 AM
Total Messages Posted	270
Total Helpful Votes Received	70

Default Layout View When Call Starts