Hi,We have a C2821 (IOS 12.4(22)T4) and CME 7.0(1) and after an IOS upgrade (previous IOS was 12.4(15)T) we lost a feature on all 7911 phones.When handset is onhook "Dial" and "NewCall" softkeys are not working while on the previous version we could ...
Hi,We have a CUCM 7.1 and a 2821 with 2PRI connected to the PSTN.When calling outbound from an IP Phone 79xx (7911, 7945, etc) to the PSTN we got the following error:Dec 14 10:18:26.249: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8 callref = 0x070D...
Hi,we have a CME B-ACD configured with an Auto Attendant prompt menu and then two hunt-group options.The problem we are having is that when calling from certains old analog phones the system doesn't recognize the inputs ("1" or "2"), so the call is n...
Hi,we have a CCME+CUE with a PRI connected. We need that when an ingoing DID is called, depending on the procedence of the call (Spain, France or Other) it has to be forwarded to three different AutoAttendant scripts already defined on the CUE.Is tha...
Hi,Same problem here. License Manager Service in PUB keeps in "starting" state and trying to stop and restart does not make any change.In the SUB License Manager Service is running fine and we have all licenses and DLU correctly uploaded and there ar...
Hi,TAC has told me this is actually a bug (CSCtb74251) on 12.4T IOS....Here is the link to the bug tool kit:http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCtb74251This has been fixed in 15.x releases,...
Hi Art,CIPC version is 2.1.3.0 and CUPC version is 7.0(2.13496).I am pretty sure that what solved this was including the "incoming called-numer ." command into a voip dial-peer, because I didn't restart the phones after disabling the g722 advertiseme...
Hi Mary Beth,I have applied both the changes you suggested (disabling g722 advertising and including "incoming called number ." into a voip dial-peer) and now it is working fine!I really don't know how this can only affect just to IP phones 79xx and ...
